ISO Amp that does 100 rms @ 4 ohm per channel

[Savackz]

UPDATE: I need an amp that does 100rms at 4 ohms per channel and also, in the same amp, one that does 250 or so rms at 2 ohms bridged.

Click to read more...

 

[trumpet 5,000+ posts]

I have a CDT MXMA-3001 amp on hand that is rated for 300W x 1 at 2 ohms. It's Class AB and very small. I can give you a special price on this.

 

[Savackz]

@trumpet What is the special price? I updated the post because I found some mids that are 5.25

 

[trumpet 5,000+ posts]

You won't likely find a 4-channel amplifier that is 2 ohm stable when bridged. The only thing that comes to mind is some Rockford amps, maybe, but I don't sell RF.

I would sell the MXMA-3001 and MXMA-1502, which would give you 300W x 1 and 100W x 2, for $400. These two amps are very nice Korean built amps that are exactly the same size, so you can put them side by side and not have OCD kick in because they don't match. The controls are under covers on the top panels. I'm discounting them because the cosmetics on these first production run amps are not perfect.

 

[Savackz]

You won't likely find a 4-channel amplifier that is 2 ohm stable when bridged. The only thing that comes to mind is some Rockford amps, maybe, but I don't sell RF.
I would sell the MXMA-3001 and MXMA-1502, which would give you 300W x 1 and 100W x 2, for $400. These two amps are very nice Korean built amps that are exactly the same size, so you can put them side by side and not have OCD kick in because they don't match. The controls are under covers on the top panels. I'm discounting them because the cosmetics on these first production run amps are not perfect.

I need it 4 ohm bridged around 250rms and 100 per channel at 4 ohms. So 2 comps at 4 ohm each (100rms) and then both mids in the back be powered by a bridged channel at ~250 @ 4 ohm.

 

[gckless 5,000+ posts]

So you need 5 channels? I've got a Zed Leviathan III in the FS section that would work.

 

[Savackz]

No. Technicaly 3 channels with two of the channels of the four channels bridged for 2 8 ohm midrange speakers.

 

[Savackz]

So, 2 components use 2 channels with 100rms per channel. 2 midrange speakers use ONE bridged channel that does around 250rms at 4 ohms for 2 8 ohm speakers.

 

[Savackz]

Wait. Realized that each side of the car might need it's own channel. So I need either 4 ohm midrange speakers for rear or just a new amp for my components. Do rear stage speakers help at all?

 

[trumpet 5,000+ posts]

What exactly are you doing with this system? Why would you have 2 midrange speakers per side? Was the original intent to have front and rear speakers or just front speakers with the sub?

 

[Vertex Audio Pro Seller]

This would work:

Phoenix Gold SD 800.4 4 Channel Amplifier

 

[mstockt1]

what is your budget? Are there any brands you don't want? I have a tt4300 planet audio amp from 2003. It will do rated. @ 4ohms 75rmsx4, @ 2 ohms 150rmsx4, bridged @4 ohms 300rmsx2.

 

[Savackz]

1 set of front, 1 set of rear

 

[mstockt1]

Sure, it could be used like that. I also have a p600.5. 4 channels are high only and the 5th channel 300rms @2 ohms.4x 50 Watts RMS @ 4 Ohm Stereo + 1x 200 Watts 4x 100 Watts RMS @ 2 Ohm Stereo + 1x 300 Watts. Only issue, the Saturn logo is missing and the blue LED no longer works.

 

[bradl79 10+ year member]

http://www.caraudio.com/forums/amplifier-classifieds/613639-fs-cadence-zrs-c9-600w.html

 

[CerwinVega_Fan 10+ year member]

I have a sony big red that's stable at 1 ohm bridged //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Beasty amp!

 

[foreman 10+ year member]

I have a really nice Phoenix gold Ti21600.5 for sale. Lots of power, small and efficient. Amp makes 148x4@4ohms, and 226x4@2 ohms stereo. Sub channel puts out 926@2ohms...

 

[Sqall12001 10+ year member]

I have a nice Old school Sherwood 100x4 amp, and 250 x 2 @4ohm (as most are)

THD = >%.05

-Nick

 

[ObeyYourRobot 10+ year member]

JL 300/4

75 x 4 @ 1.5-4ohm

150 x 2 @ 3-8ohm

PM me if interested //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif