Plottin4success
10+ year member
CarAudio.com Elite
I'm working with a 2004 single cab Silverado. I think Im set on getting 2 LI 10s and running them off of a Hifonics Brutus BXi1610D. They should get 800w each at 1ohm. I have a 145 amp alt and an Optima Red Top, is that enough?
My height is 15", length of 57", top depth of 7.5", and a bottom depth of 10". This comes out to roughly 3.14^3 before sub and port displacement and 2.9 after sub displacement. I want to tune to 32hz using a round aero port. What size aero port should I use?
So basicaly, my questions are...
1. Is 2.9 cubes enough for 2 10" IA LI subs after sub displacement?
2. What size aero port should I use and how long should it be for 32hz?
3. Is a 145 amp alt enough for a 1800w between my subs and front stage?
If its not enough room, then I'll prolly buy another BL 12". I used to have one but I sold it before I ever installed it.
My height is 15", length of 57", top depth of 7.5", and a bottom depth of 10". This comes out to roughly 3.14^3 before sub and port displacement and 2.9 after sub displacement. I want to tune to 32hz using a round aero port. What size aero port should I use?
So basicaly, my questions are...
1. Is 2.9 cubes enough for 2 10" IA LI subs after sub displacement?
2. What size aero port should I use and how long should it be for 32hz?
3. Is a 145 amp alt enough for a 1800w between my subs and front stage?
If its not enough room, then I'll prolly buy another BL 12". I used to have one but I sold it before I ever installed it.
