Is it physically possible...??

[SATX210]

agu, thats barrel right, maybe the two ends of the wires were pushed together inside the case. being the lack of fuse, equaling more space. and when your friend moved the amp pulled on the power wire creating a gap.... equaling no more current.

yes exactly. or do you have a cap? but really it was probably touching in the fuse holder since most fuse holders are weak and easy for the wire to slip around.

 

[blue93corsica 10+ year member]

were there any strands of copper from tyhe remote line touching the 12v line in on the amp?

 

[snb778 5,000+ posts]

maybe a few strands of wire were touching the other side of the wire on the fuse holder??

Or your just an idiot and hooked up the remote turn on to the battery... hahah j/k

 

[slickmoney7 10+ year member]

as far as the two ends touching inside the barrel.....i dont think so cuz there was plenty of slack on the power wire in the trunk so wen he moved the amp it wouldnt hav pulled enough to move it all the way from under the hood

and im about 99% sure the remote wire wasnt touching the 12v line on the amp

 

[9512ds 5,000+ posts]

when i had a 4 guage run in my old car witht he little tube fuses the metal pieces it connected into would touch with no fuse and play....

not reccomended but was kind of cool to mess around with

 

[iamamp3pimp 5,000+ posts]

i call :bs:

 

[AJ²06 5,000+ posts]

this may b a dumb question or i could b going crazy....but is it possible for an amp to get power without a fuse in the fuse holder of the power wire??? i'll elaborate if u need me to but for now ill just leave it at that

ARE u suggesting "air that can carry electrons" to complete the circuit?

 

[JimJ 5,000+ posts]

At 12V, forget about it.

At a couple of thousand volts, then you can give it a thought...

 

[slickmoney7 10+ year member]

im not suggesting anything, im just stating the facts of wat i saw and am asking for an explanation, i didnt believe it wen i saw it but it definately happened

 

[JimJ 5,000+ posts]

The closest thing to this that I've seen is when we installed Denim's Eclipse in the Brabus...**** thing was turning on with no ground wire attached. I still don't know how it did that, can't come up with a good explanation for it.

Did you measure infinite resistance between the positive terminal on the amp and the positive lug on the battery? Otherwise, this is all hearsay and speculation...

 

[IronCityGuy 10+ year member]

Were you guys high?

You know these kids now adays...

 

[cleanerupper 10+ year member]

Yeah them darn whippersnappers...I should get me one of them misquitos, that'll take care of them good.

 

[badstang123 10+ year member]

I think one of your friends was ****ing with you guys and pulled it out when you weren't looking. Otherwise this sounds the most logical to me

Originally Posted by justinschmiidtagu, thats barrel right, maybe the two ends of the wires were pushed together inside the case. being the lack of fuse, equaling more space. and when your friend moved the amp pulled on the power wire creating a gap.... equaling no more current.

 

[SATX210]

im not suggesting anything, im just stating the facts of wat i saw and am asking for an explanation, i didnt believe it wen i saw it but it definately happened

i say you are a noob and dont know jack!

 

[cleanerupper 10+ year member]

lol