is it dead(pics)

[meistah 10+ year member]

so i ripped my concept cc-d1200a apart to see why it just wont power on anymore...i took a couple pics...looks like those capacitors are blown cuz they are bulging at the top, which i think you can see in the pics....

Click to read more...

 

[meistah 10+ year member]

hmm....guess i should pose this as a question...so do they look blown or wrecked? can i replace them/get the amp fixed, where would i do that, etc

 

[Twistid 5,000+ posts]

check to see if your power terminal simply dident come loose

on my old 81000d, the vibrations were so bad the power terminal simply broke off but was still held in place because of the plastic around it

 

[meistah 10+ year member]

teh power terminal is pretty securely in place, i cant even wiggle it, im assuming you mean like where the power wire goes...thing is i have these led fans mounted on it for extra cooling, and if i touch the +and- of them to the power and ground terminal to power them the amp clicks like its turning on but it doesnt...also clicks if i remove and put back the remote wire...but no power or lights or anything, that and the large black capacitors are very bulged on top

 

[meistah 10+ year member]

bump.... just need to know if it is those black dealies that look to be the problem and if i can get em fixed and if so where

 

[the727kid 10+ year member]

I'm just going to take a guess and say it has something to do with those 2 loose wires

 

[meistah 10+ year member]

heh....thanks but you guessed wrong( i think) those are for the extra fans