deez283 10+ year member
Senior VIP Member
Hey all was wondering if anyone could offer some advice on my current plan..
Vehicle 1994 Chevy Ext. Cab
Subs Dayton HO SVC 10" x2
Amp Zapco st1650
There is no room under my rear seat and this year you can't lift it so I'm gonna try my first console, when done I'll wrap it in vinyl, I also plan a little cubby and cup holders..
My Plan is to go Down fire with Port firing towards the dash. 1.4 cubes after sub and Port, tuned to 30hz with a 4" PSP Aero Port at 24" long
My question is will this have port noise or should I be good?
Parts express is saying .5 tuned to 36hz per sub on their site, Should I be going this route or stick with what I got?
Any help would be a great help.
Vehicle 1994 Chevy Ext. Cab
Subs Dayton HO SVC 10" x2
Amp Zapco st1650
There is no room under my rear seat and this year you can't lift it so I'm gonna try my first console, when done I'll wrap it in vinyl, I also plan a little cubby and cup holders..
My Plan is to go Down fire with Port firing towards the dash. 1.4 cubes after sub and Port, tuned to 30hz with a 4" PSP Aero Port at 24" long
My question is will this have port noise or should I be good?
Parts express is saying .5 tuned to 36hz per sub on their site, Should I be going this route or stick with what I got?
Any help would be a great help.