inverted subs

[audioholic 5,000+ posts]

Correct.

 

[J3M Concepts 10+ year member]

wire it up normally and reverse it where you wire it to the amp

 

[J3M Concepts 10+ year member]

****....yall are quick

 

[dannyz122001 10+ year member]

also, the volume of the inverted sub is only the enclosure volume-port displacement, correct? no need to subtract the sub displacement?

 

[MyFartsStink 10+ year member]

for the sub thats not inverted, run pos to pos term on the sub, and from the pos term of sub to other vc, easier for me that way so less joints to solder or connect. And do the neg the same way. On the other sub, do it vise versa. Audioholic, do you have a masters mecp certification?

 

[audioholic 5,000+ posts]

also, the volume of the inverted sub is only the enclosure volume-port displacement, correct? no need to subtract the sub displacement?

The sub will not be occupying space within the enclosure, so no you would not subtract its volume when calculating enclosure volume.

Audioholic, do you have a masters mecp certification?

No, Im not a professional in car audio, I see no need for it myself.

 

[btdickey99 5,000+ posts]

pretty boxer

 

[dannyz122001 10+ year member]

The sub will not be occupying space within the enclosure, so no you would not subtract its volume when calculating enclosure volume.
so theoretically, i could give 1 sub about 5.1 cubes and the other 4.9cubes instead of giving them both 5cubes

 

[MyFartsStink 10+ year member]

No, Im not a professional in car audio, I see no need for it myself.

So you just learned everything on this site huh? You know that there is alot of interesting facts in the mecp books, just the basic has alot of shit I have learned. Im studying the advanced, but never have enough time for it since im on here alot.

 

[dannyz122001 10+ year member]

pretty boxer

thanks. first time i have heard him considered "pretty" but i will gladly take the complement. thanks again

 

[audioholic 5,000+ posts]

The sub will not be occupying space within the enclosure, so no you would not subtract its volume when calculating enclosure volume.
so theoretically, i could give 1 sub about 5.1 cubes and the other 4.9cubes instead of giving them both 5cubes

If the speaker occupies .2 cubes, then yes.

So you just learned everything on this site huh? You know that there is alot of interesting facts in the mecp books, just the basic has alot of shit I have learned. Im studying the advanced, but never have enough time for it since im on here alot.

No I wouldn't say I learned everything here. I went to an installer school in the early 90's, and was a hobby for several years before that. Just been.. a hobby since too. I could have gone on and got certified, but Im a mechanical engineer, I dont really see the point. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif