omnipseudo
10+ year member
.4Wheelin Sound Addict
Hi, I currently have a Boss 700w 2ohm amp powering my 2 Kicker CVrs off of my Sony HU. Now, im trying to wire my rear roll-bar speakers (Jeep Wrangler) to an amp that was given to me. Its a Pioneer GM-X252 and it says its 2ohm stable at 40wx4 chans...I wired the amp just like normal, ground to body, power to battery, rem to hu, rcas to rear pre-outs on hu. I used 8 gauge power and ground wire with a 20 amp fuse in the power wire, same as the amps fuse. But I get no sound. Ive tried grounding it to the same place as my other amp, different place, daisy-chaining the REM wires, having both rems to the HU, no sound.
A main Q i have is on this amp, when its 'on' does the light turn green? The light on top is red right now, and id assume this is some sort of stand-by mode? Or maybe its just one color. My friend doesnt know as hes never used the amp. Any suggestions/comments that may solve my problem would be helpful! Thanks in advance.
A main Q i have is on this amp, when its 'on' does the light turn green? The light on top is red right now, and id assume this is some sort of stand-by mode? Or maybe its just one color. My friend doesnt know as hes never used the amp. Any suggestions/comments that may solve my problem would be helpful! Thanks in advance.