Image Dynamics

[ejschultz 10+ year member]

Well, I bought a set...

TS-C720PRS //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

I took it a completely different direction. I did some reading (manufactures' websites) and priced out everything I was looking at. Then I compared specs and feedback on the sets I was looking at. The TS-C720PRS are very highly recommended/rated by everyone who has tried them. I didn't see a bad thing about them. I jumped on them just as I didn't want to do. Will I be disappointed? Only a few days for delivery and some time for the install will tell. Thanks for all your help and I'll let you know in a couple of weeks after I get them in and break them in what I think of them. Again, thanks for the help and putting up with my dumbass.

 

[Macklessdaddy 10+ year member]

Well, I bought a set...















TS-C720PRS //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

I took it a completely different direction. I did some reading (manufactures' websites) and priced out everything I was looking at. Then I compared specs and feedback on the sets I was looking at. The TS-C720PRS are very highly recommended/rated by everyone who has tried them. I didn't see a bad thing about them. I jumped on them just as I didn't want to do. Will I be disappointed? Only a few days for delivery and some time for the install will tell. Thanks for all your help and I'll let you know in a couple of weeks after I get them in and break them in what I think of them. Again, thanks for the help and putting up with my dumbass.

will be looking for a review

 

[ejschultz 10+ year member]

will be looking for a review

I definitely will get one up in the speaker review section. Give it a few weeks and you'll see it among all the spam in there.

 

[FJF 10+ year member]

Congratulations, I hope you have a lot of fun with the Pioneers.

 

[misfit138 5,000+ posts]

I hear good things about those Pioneers...

 

[RowJoe 10+ year member]

Nice choice. Some guys ditch the passive xovers and just go active with this particular set. I've read the xover point for the tweets is a bit low for some ears, 2KHz 12/dB slope I believe. Raising that should take away some sibilance and make them less fatiguing.

 

[okiedokie 10+ year member]

Hey ejshultz,

excellent chioce.

 

[ejschultz 10+ year member]

Congratulations, I hope you have a lot of fun with the Pioneers.

I'm sure I will...

I hear good things about those Pioneers...

'Tis why I got them.

Nice choice. Some guys ditch the passive xovers and just go active with this particular set. I've read the xover point for the tweets is a bit low for some ears, 2KHz 12/dB slope I believe. Raising that should take away some sibilance and make them less fatiguing.

When I get them, I'll try out the passive crossovers for a while, further wasting the potential of my 800PRS. If I feel that 2 kHz is too low, I may ditch my rear fill and run them active.

Hey ejshultz, excellent chioce.

Thank you. I do agree. Hopefully I will still agree after I get them installed.

 

[okiedokie 10+ year member]

remember install is just as important as the speakers,

placement,aiming, deadening.

 

[ejschultz 10+ year member]

remember install is just as important as the speakers,placement,aiming, deadening.

Placement: factory location for mids, sail panels for tweeters.

Aiming: really nothing I can do with mids, tweeters have a couple of different options so I should be okay (plus they're dome tweeters, not ring radiators)

Deadening: This will be a feat for another time. I just spent all my monies on speakers.

 

[Xprime4 10+ year member]

at least seal the hole in the doors, that will help alot

 

[ejschultz 10+ year member]

at least seal the hole in the doors, that will help alot

I'll be doing whatever I can. If anyone has any good & cheap deadener recommendations, let me know and I'll take a look at it.

 

[Horsemanwill 10+ year member]

raammat

 

[ejschultz 10+ year member]

raammat

I've heard that's pretty good stuff. My question is, do you need heat to apply it or just pressure like the Dynamat Xtreme?

 

[Horsemanwill 10+ year member]

i myself haven't used it but for the price it's great stuff i myself use SecondSkin. but you asked for a cheap deadener and even though SS is excellent stuff i don't think you'd consider it "cheap"