I'm Thinking About Getting A Big Boy Interfire Amp...

[aCer_209 10+ year member]

IS IT ANY GOOD???

I'M LOOKING AT THE A2200.2 MODEL

http://www.interfireaudio.com/ampsAB.html#bigboy

Click to read more...

 

[Rictamilk 10+ year member]

Caps lock gets you points.

 

[01xtreme 10+ year member]

Isnt class A/B alot less efficient? if so that would be the only thing bad I can say since I have never heard of that brand.

 

[Prowler573 5,000+ posts]

IS IT ANY GOOD???I'M LOOKING AT THE A2200.2 MODEL

http://www.interfireaudio.com/ampsAB.html#bigboy

All caps isn't necessary //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

What are you wanting to power with it?

 

[Pickler 10+ year member]

dang 1100 rms, what a beast

 

[aCer_209 10+ year member]

wow, didn't think capital letters would be a big deal. but i'm planning on getting a 12" XXX RE

 

[mike dressure 10+ year member]

actually they are decent amp's just oversized which give's off the aw factor i suppose, but it does rated power!

 

[mike dressure 10+ year member]

wow, didn't think capital letters would be a big deal. but i'm planning on getting a 12" XXX RE

what is the power rating on a xxx?

 

[aCer_209 10+ year member]

there's pretty much everything about it

Electrical Q Value -Qes: 0.46

Mechanical Q Value -Qms: 3.29

Total Speaker Q Value -Qts: 0.404

Free Air Resonance -Fs: 21.00 Hz

Equivalent Compliance -Vas: 74.0 liters

One-Way, Linear Excursion -Xmax: 54 mm

Efficiency -SPL 1W/1m: 83.76 dB SPL

Effective Piston Area -Sd: 480 cm^2

DC Resistance -Re: 4.2 ohm

Nominal Impedance -Znom: Dual 2 ohm

Thermal Power Handling -Pe: 2000 W

Force Factor -Bl: 18.16

Mounting Depth - 12.75”

Mounting Hole Diameter - 11.5”

Overall Diameter - 13”

Bolt Hole Circle - 12.25”

Motor Width - 10.5”

Motor Depth - 5”

Basket Depth - 7.75”

Displacement - 0.24 cu. ft.

Weight - 72 lbs.

 

[mike dressure 10+ year member]

i would go for a bit more power to get that sub going imo! that amp would be a great amp.....but not for your situation!

 

[Showrides]

That amp will not power an 06 XXX.

How much that thing cost anyways? The amp that is.

 

[aCer_209 10+ year member]

so what would be a good amp to power it

 

[Prowler573 5,000+ posts]

Wouldn't a XXX really want more than 1,100 watts?

 

[tapout 5,000+ posts]

Wouldn't a XXX really want more than 1,100 watts?

yes

 

[Pickler 10+ year member]

With efficiency of 83.76 dB SPL 1100 wats wont even move it