I'm a little pissed at Parts Express

[mcsoul 10+ year member]

I planned on building a 1.5 cubic foot enclosure tuned to 30hz this weekend

for 2 Dayton HO 10's. Using the T/S parameters on the product PE page, winISD

had that as a pretty nice box for them. I've been planning the box for a while.

Just to cross my T's and dot my I's I downloaded the manual. Well the T/S

parameters on the Parts Express website were all off. I had setup almost

all the winISD Dayton drivers for HO and Titanic's off Parts Express and they

are basically all wrong.

Anyway, my wood is ripped wrong, but at least the box needs to be smaller.

1.4 at 33Hz is looking good.

Just thought I'd vent. Thanks.

Click to read more...

 

[ls2poweredgoat 5,000+ posts]

They list some mids as 7" instead of 6.5" too. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[mcsoul 10+ year member]

They list some mids as 7" instead of 6.5" too. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Yeah. But it's definitely my fault for not downloading the manual

before I ripped the wood. I wanted to give folks a heads up to rampant

discrepancies on the Dayton Subwoofer product pages at PE.

 

[ls2poweredgoat 5,000+ posts]

Yeah. But it's definitely my fault for not downloading the manualbefore I ripped the wood. I wanted to give folks a heads up to rampant

discrepancies on the Dayton Subwoofer product pages at PE.

Well sell the box on here, wood is cheap, build a new one mang! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Brian_smith06 10+ year member]

I'm mad at them because speakers i ordered to wire our store with are on backorder and have been for the past 2 months. they update the backorder date every two weeks and its annoying. oh well. i guess i should be more mad at jbl than PE

 

[Rashaddd 5,000+ posts]

Well sell the box on here, wood is cheap, build a new one mang! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

31 bucks a sheet for 3/4" here //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[GlocksRock 10+ year member]

31 bucks a sheet for 3/4" here //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

That's crazy... I can get it for $20 - $25 a sheet here.

 

[mcsoul 10+ year member]

Well sell the box on here, wood is cheap, build a new one mang! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

I would hate to ship a box and have it get damaged and all that jive.//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[ls2poweredgoat 5,000+ posts]

I would hate to ship a box and have it get damaged and all that jive.//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

Package it properly. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Lil Poot 5,000+ posts]

hk > glock //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

there is such a thing as a 7" driver.

 

[mrogowski 5,000+ posts]

31 bucks a sheet for 3/4" here //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

$55 a sheet here. But that's for Fir Ply //content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif

 

[MikeyB 5,000+ posts]

22.XX here

 

[rollerdj 10+ year member]

25 here. sell it for what the cost of the wood was and use that to buy another sheet. win win IMHO.

 

[Rich B 5,000+ posts]

Im pissed at them too.

These Tang Band 6.5" mids were only $52 ea. a month back, now they want $84 ea. for them.//content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif

It seems like they raised the price to pay for their holiday "free shipping" they just announced.//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=264-874

 

[ngsm13 5,000+ posts]

Well, I never use winISD to model boxes...

I use knowledge...

winISD just tells me my port length...

nG