I really nee to know will this handle

[Rad 10+ year member]

ok imagine two JBL Gti subs!:

Diameter 10" (250mm)

Sensitivity 90dB @ 2.83V/1m

Power Handling 600W RMS, 3,000W Peak

Frequency Response 20Hz ~ 1kHz

Impedance 3 or 12 ohms

Voice-Coil Diameter 3" (76mm)

will this amp give the two subs the power they need to sound brill?:

http://www.audiobahninc.com/products/detail.asp?productsID=47

And would i have to wire the subs up in parallel?

Thanks very much

Click to read more...

 

[david01_69 10+ year member]

You better ****ing belive it will i had one of those amps in my old ride and i blow two compition rockford fosgate 12"s

 

[drkodin 10+ year member]

are these the new GTi subs? if so your specs are way off.

second, it will be a perfect match for those subs. if you have two of those wired all in parallel you will get a 1.5Ohm load. since that amp is 1600W@1Ohm, it will be right around 1200-1300W, or 600-650W per sub. a great match.

 

[ICE 10+ year member]

Originally posted by drkodin are these the new GTi subs? if so your specs are way off.

second, it will be a perfect match for those subs. if you have two of those wired all in parallel you will get a 1.5Ohm load. since that amp is 1600W@1Ohm, it will be right around 1200-1300W, or 600-650W per sub. a great match.

are there new GTi subs out then? if so whats the specs?