ok imagine two JBL Gti subs!:
Diameter 10" (250mm)
Sensitivity 90dB @ 2.83V/1m
Power Handling 600W RMS, 3,000W Peak
Frequency Response 20Hz ~ 1kHz
Impedance 3 or 12 ohms
Voice-Coil Diameter 3" (76mm)
will this amp give the two subs the power they need to sound brill?:
http://www.audiobahninc.com/products/detail.asp?productsID=47
And would i have to wire the subs up in parallel?
Thanks very much
Diameter 10" (250mm)
Sensitivity 90dB @ 2.83V/1m
Power Handling 600W RMS, 3,000W Peak
Frequency Response 20Hz ~ 1kHz
Impedance 3 or 12 ohms
Voice-Coil Diameter 3" (76mm)
will this amp give the two subs the power they need to sound brill?:
http://www.audiobahninc.com/products/detail.asp?productsID=47
And would i have to wire the subs up in parallel?
Thanks very much