i need some 0 and 1/0 gauge power cable

[PowerNaudio 10+ year member]

im looking for some good quality 0 gauge power cable to do the big 3 for a 200amp alternator and a run of 0/1 gauge about 15' to 25' from the battery to the power distributor block in the trunk.

i need it for cheap.

the power cable doesnt have to be new.

but it has to be in great shape.

no burns or deep cuts that reach the wire.

throw me some offers.

laters

Click to read more...

 

[swangin68 10+ year member]

i have 2 14 ft pieces of 1/0 welding lead i have left over from my install. plenty big and flexible...3/8 fine stranded wire. ill take 50 shipped

 

[yacob.naif 10+ year member]

make sure you label the 0ga. and 1/0ga. so you don't mix them up

 

[PowerNaudio 10+ year member]

i have 2 gauge thats 3/8" across. that will not work for me thanks.

 

[swangin68 10+ year member]

just the wire is 3/8 on ur 2 awg wow thats big 2 awg...ok so u need 1/2 wire then,????? thats like 3/0

 

[PowerNaudio 10+ year member]

the problem is that some companies sell wire labeled one gauge and they give you a smaller gauge and they make the insulation huge and only give you like 2 gauges smaller wire.

thats what happen with power wire i have now and i didnt pay attention. so i got a 2 gauge wire dressed in 1 gauge wire insulation. lol lame.

so i want some real gauge wire.

real 0 and 1 gauge wire.

 

[XaznKewLguyX 10+ year member]

I have a strand of Kicker Hyperflex 0AWG about 23ft that I'd actually be willing to part with. but if you really need more I have plenty of hyperflex if the price is right.

 

[PowerNaudio 10+ year member]

I have a strand of Kicker Hyperflex 0AWG about 23ft that I'd actually be willing to part with. but if you really need more I have plenty of hyperflex if the price is right.

you have a pm.

 

[negativezeroz 5,000+ posts]

bump for a good guy...but question for ya..your 2awg..is it 3/8" WITH jacket or without? I take it, with the insulation is 3/8"

 

[PowerNaudio 10+ year member]

bump for a good guy...but question for ya..your 2awg..is it 3/8" WITH jacket or without? I take it, with the insulation is 3/8"

sup negativezeroz thanks for the bump.

its actualy between 5/16" and 3/8" , 2 gauge ground wire. have about 3' of it.

 

[negativezeroz 5,000+ posts]

My 1/0 I have is 1/2" with jacket and wire itself is 3/8". So yeah, you need larger wire. lol

 

[Big Dee 10+ year member]

im looking for some good quality 0 gauge power cable to do the big 3 for a 200amp alternator and a run of 0/1 gauge about 15' to 25' from the battery to the power distributor block in the trunk.

0 gauge is the same as 1/0.

If you meant just 1 gauge, good luck finding that.

Also, 3/8 inch diameter is 0 gauge, //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[PowerNaudio 10+ year member]

ok so i need one run of 0 awg!!!!!

 

[PowerNaudio 10+ year member]

can any one tell me if this is a good brand for the size and price

http://cgi.ebay.com/KnuKonceptz-Silver-Pearl-1-0-Gauge-Power-Ground-Wire_W0QQitemZ220041799327QQihZ012QQcategoryZ32810QQrdZ1QQcmdZViewItem

 

[negativezeroz 5,000+ posts]

http://knukonceptz.com/productMaster.cfm?category=KLM%20Kable

Just get it from Knu directly. If you want some more flexible and larger, get the Kolossus but its $3/ft instead of $1.75/ft

edit: That eBay looks to be them but I'd still feel safer ordering on their site.