I Need a Box

[Sweet'n Low 10+ year member]

I've got two 12W3v3-4's being held from their full potential due to my bad decision of choosing a bypass prefab box. Looks like I'm going to need a new box.

Here are the specs

Preferred Box Size:

W:32" D:16" H: 14"

Looking at the JL site, these specs are very unrealistic but I thought I'd throw it out there. It's the size of the box i have now and it fits perfect. I have small amounts of trunk room

here's a idea of how big my trunk is

I'd prefer it to have someone close to me make it. that would be ideal but unrealistic. i'll pay for $hipping if need be tho. if nothing else, some how to's and some box plans would be nice. all responses welcome..

Click to read more...

 

[RAM_Designs 5,000+ posts]

You only have 3.2ft^3 before any port or sub displacement...not enough for a pair of your 12's, but good for a single one. I highly recommend trying to fit more room somehow.

 

[dbeez 5,000+ posts]

pioneersaturn is in dayton ohio where are you..

 

[power-fanatic07 5,000+ posts]

You're going to have to have a little bit bigger box for those 12's.

34w x 14h x 18d

Buy 2 4" aero ports here

Parts-Express.com:

 

[FIMPALASS 10+ year member]

Yeah I would hit up Pioneer saturn he does good work.

 

[Sweet'n Low 10+ year member]

I live in springfield a good 20 mins away. i'll have to see if i can get a hold of this Pioneersaturn guy. I might be able to work those 34w x 14h x 18d specs. only concern is the width but we'll see.. if nothing else i'll go with one. i'd rather have one running properly then two running like sh*t.

 

[Sweet'n Low 10+ year member]

considering moving up to one 15 inch sub if that would save room...

 

[RAM_Designs 5,000+ posts]

considering moving up to one 15 inch sub if that would save room...

Still too small with the dimensions you listed in the first post.

 

[Sweet'n Low 10+ year member]

Still too small with the dimensions you listed in the first post.

mm not surprised i suppose.. maybe sell both and get one 12" (or 13") with the quality of the two combined? i'll keep the amp i have and use it to run whatever i have now: any suggestions? my amp has a 1100 rms max @ 1 OHM

 

[BumpinKota 10+ year member]

I live in the area, im up by cleveland. And im a very experienced box builder. I can send you some pictures if you'd like. My buddy owns a cabinet shop so i have unlimited mdf + any tools i need.

 

[Sweet'n Low 10+ year member]

Bump

 

[Sweet'n Low 10+ year member]

850RMS @ 2 ohms

1100RMS @ 1 ohms

im doing a seach now, any suggestions would be appriceated