I hope i made a good choice.

[SVTLightning01 10+ year member]

Well, i went all out on ebay. Picked up a bunch of goodies.

So far i have on the way:

Diamond Audio D61000.1

Audio Enhancers Box for a d612

Pioneer Premier p880prs

Stinger 4 gauge wiring kit

Stinger Expert RCAs

I already installed a set of Diamond D651 components, and d393L 6x9s fed by a pg octane r amp. (not the greatest i know, but good enough. I think im going to take out the 6x9's bridge the amp and put 125wrm to the components. I originally put the 6x9s in there to get by, but with the new car, i need bass. tHE BY 9S DONT CUT IT.

Im just hoping that i will be happy with this setup.

P880prs

D61000.1 feeding a m612mkII @ 1ohm

1.75ft^3 box custom made for a d612 by audioenhancers

D651 components in the doors.

Ive done tons of research. I hope this beyotch sounds good.

Criticisms/opinions?

Click to read more...

 

[saywhat? 5,000+ posts]

sounds like a good setup, but why not build your own box?

 

[SVTLightning01 10+ year member]

i dont have the room, or the tools. The box is made for the specs on the d612 (same specs as the m612). It was only 70 bucks or so. If it sucks, ill build my own.

 

[killahbean 10+ year member]

lookin good.....diamond audio stuff are excellent but doesnt hold their value that much

 

[SVTLightning01 10+ year member]

i plan on keeping it for a while. The only thing i might do is buy a bigger/badder sub down the road. Thats why i opted for the larger amp so i have room to grow =).

 

[stuckinok 5,000+ posts]

pretty good choices...hope you didnt pay too much

 

[SVTLightning01 10+ year member]

i paid 300 for the amp, 300 for the deck, 40 for the stinger kit, 40 for the rcas, and 75 for the box, plus shipping.

 

[stuckinok 5,000+ posts]

not bad, not bad ive seen similar set-ups and they were pretty **** good...

 

[SVTLightning01 10+ year member]

hope so, im not looking to shatter any records, but should sound **** good.

 

[smd4life 5,000+ posts]

you should be happy good choice, is the box sealed?

 

[SVTLightning01 10+ year member]

no its ported. I went off of previous thread by exelerator, and he uses the same box for a d612 and he said its perfect. It looks quality, rounded edges in the port area, corners are filled.....looks great.

 

[SVTLightning01 10+ year member]

hope this works

 

[SVTLightning01 10+ year member]

that might be a generic pic to show construction, but if the box is built like this one, ill be happy.

 

[smd4life 5,000+ posts]

looks nice

 

[PowerNaudio 10+ year member]

it looks good, but i think is just like the pictures of the burgers at burger king. your burger never looks like the one on the picture. hehe.

but i dont know i have never dealt with them, but i guess you can give us a small review on how you like it once you set it up.

laters