I got some few Questions! I need some Anwsers ASAP!! Thanks!!!

[nofriends46 10+ year member]

I have a Soundstream rubicon 204 (25 x 4), hook up to an Profile electronic crossover that has a front and sub input, mid,high,sub & full output. My head unit, had sub, rear and front output, so my sub and front output from my HU goes to the sub and front input in the Electronic crossover.

My tweeters are hook up to my 1 & 2 channel and my regular coxial speakers are hook up to channels 3 & 4. So my electronic crossover, my high output goes to 1 & 2 and my mid output goes to 3 & 4. When i remove channels 3 & 4, my regular speakers work still, what seems to be the problem?

I thought when i remove it, there will be no sound at all?

What is Local and Remote for my Soundstream Rubicon 204? i want all the channels work, not only one. How do i do that?

Also when i figure out the problem, what do i set my mids and highs?

I got some questions from my electronic crossover

What is Phase 0 - 180 degrees?

Input DR - MIX?

Mode ST - MO?

ouput level?

When i installed my electronic crossover, my highs are not that high anymore? Before i installed it my highs sounded fine.

Also i have some egine noise going on, i have a book to figure it out. Hopefully i do.

Any suggestions, should i take my electronic crossover out, or just leave it in?

My regular speakers are connected to bass blockers. Thanks for you patiences!!!!!

Click to read more...

 

[chris229 10+ year member]

Originally posted by nofriends46 I have a Soundstream rubicon 204 (25 x 4), hook up to an Profile electronic crossover that has a front and sub input, mid,high,sub & full output. My head unit, had sub, rear and front output, so my sub and front output from my HU goes to the sub and front input in the Electronic crossover.

My tweeters are hook up to my 1 & 2 channel and my regular coxial speakers are hook up to channels 3 & 4. So my electronic crossover, my high output goes to 1 & 2 and my mid output goes to 3 & 4. When i remove channels 3 & 4, my regular speakers work still, what seems to be the problem?

I don't understand want you saying? regular speakers?? you mean the coxials? and remove ch 3&4? you mean unplug the RCAs?? from the amp OR x-over

I thought when i remove it, there will be no sound at all?

depends on the wiring

What is Local and Remote for my Soundstream Rubicon 204? i want all the channels work, not only one. How do i do that?

aside from the turn -on REMOTE wire I don't know

Also when i figure out the problem, what do i set my mids and highs?

what are the options?

I got some questions from my electronic crossover

What is Phase 0 - 180 degrees?

That phase refers to normal-0 or reversed-180

Input DR - MIX?

Dirrect OR mixed..... you want dirrect and the mix will mix sounds from the other channels

Mode ST - MO?

stereo OR mono---- you want stereo as mono mixes both left and right

ouput level?

this is from gain matching the next down stream processor or amp.

When i installed my electronic crossover, my highs are not that high anymore? Before i installed it my highs sounded fine.

Also i have some egine noise going on, i have a book to figure it out. Hopefully i do.

I can help with the noise when you post back your problems and answers

Any suggestions, should i take my electronic crossover out, or just leave it in?

we didn't trouble shoot yet how can you ask?

My regular speakers are connected to bass blockers.

you will not need that after we get your x-over strait

Thanks for you patiences!!!!!

 

[Roberto 10+ year member]

if you have your crossover set up on mix youll get sound . thats wy your hights does not sound like it should. the ST-MONO is for the sub-woofer channel.