I give up!!!!

emsdad
10+ year member

Member
51
0
Va
I have built 2 boxes and both are screwed. The first box was out of 1/2" MDF and not only did the box turn out like crap but the deminsions were wrong. I built the second out of 3/4" and 1/2" MDF and this box will fit in the space but I have more wood glue than wood..........lol. Can someone please give me some advice? I know that one problem is I am using a jig saw and it is next to impossible for me to get a perfectly straight line. I measure twice and cut once but it still seems I cannot get it right. I am a firefighter not a carpenter!!! The box I am trying to build is a wedge. Is there a program that I can put the dimensions in and it give me a blueprint on cuts, etc??

The dimensions of the box are:

16" Wide

15" Tall

8" wide @ bottom

5" wide @ top

HELP ME Please!!!!

 
It's not easy and you won't make a perfect cut with anything but a table saw or circular saw. Even with a circular saw, don't expect the cuts to be exact. Anything within 1/8 of an inch is not bad. You can always clamp panels together and then sand them down to ensure eveness. Don't worry too much about very small gaps. I would recommend using liquid nails. You can actually use that stuff to fill those gaps. It sets up nicely. Just use lots of caulk when done. Once you finish the box (carpet, or textured spray paint works very well), you won't see the imperfections.

 
Where in VA are you?

Might have some members locally to you that know a thing or two about woodworking //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

emsdad

10+ year member
Member
Thread starter
emsdad
Joined
Location
Va
Start date
Participants
Who Replied
Replies
5
Views
591
Last reply date
Last reply from
JimJ
IMG_0710.png

michigan born

    May 14, 2026
  • 0
  • 0
IMG_0709.png

michigan born

    May 14, 2026
  • 0
  • 0

New threads

Top