Hu noise on ddx-812.

[sparkplug121988 10+ year member]

I have a kenwood ddx-812 and I have a noise problem. Its not a whine its more like a fuzzy noise! When I turn my hu up and pause the track or whatever im playing you can really hear it. Its just a steady fuzzy noise. I have the big three done all grounds on the amps are good and the rca's are sheilded. What needs to be done? The hu is brand new and so is the amp, rca's, etc.....

Click to read more...

 

[sparkplug121988 10+ year member]

???

 

[Doola36 10+ year member]

turn your SRS setting off or down......//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[sparkplug121988 10+ year member]

Anything else.

 

[sparkplug121988 10+ year member]

I would like to figure this out.

 

[chereck04 10+ year member]

I have the same unit, just tried what you did and nothing happened. My guess is it's in your settings or perhaps a bad ground point.

I had an old ddx-8019 and I got feedback like that when the unit was grounded to the stock harness, but when I gave it a good ground the feedback went away.

 

[sparkplug121988 10+ year member]

Do you have the same problem with yours now?

 

[sparkplug121988 10+ year member]

ttt

 

[sparkplug121988 10+ year member]

bump

 

[RXZILLA 10+ year member]

Take it back to the dealer you bought it from.

 

[sparkplug121988 10+ year member]

I have found that most of the kenwoods do this. Their has to be someting to fix it.