How's this box?

DylanBeatz
10+ year member

Senior VIP Member
This box is for 2 12" Alpine Type-R's in the trunk of my Mustang. It's as big as i can go in every direction.

boxdesign8.jpg


Is it enough airspace? port area? And is the back of the port too close to the back wall?

 
This box is for 2 12" Alpine Type-R's in the trunk of my Mustang. It's as big as i can go in every direction.
boxdesign8.jpg


Is it enough airspace? port area? And is the back of the port too close to the back wall?
little more port area wouldnt hurt, try sliding port to one side and taking advantage of the .75 that the extra wall is using. (make port 4.75 wide, then adjust length to maintain tuning.)

my $0.02

 
This box is for 2 12" Alpine Type-R's in the trunk of my Mustang. It's as big as i can go in every direction.
boxdesign8.jpg


Is it enough airspace? port area? And is the back of the port too close to the back wall?
i agree about making the slot port on either the left or right side of the box, and you should up the port area. a good rule of thumb is 12-16sq.in of port/ cubic foot.

yours is 50/4.7=10.6, shoot for something about 60 and it should keep the same sound as what you had and not have port noise..

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

DylanBeatz

10+ year member
Senior VIP Member
Thread starter
DylanBeatz
Joined
Location
Wisconsin
Start date
Participants
Who Replied
Replies
3
Views
685
Last reply date
Last reply from
AllDayMJ
IMG_20260506_140749.jpg

74eldiablo

    May 22, 2026
  • 0
  • 0
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top