Atl_monte 10+ year member
Junior Member
I just recently purchased a car that has/had 4 Memphis 12s in a ported box, I opted to remove the box for recarpeting and due to the weight decided to remove a couple of subs first to remove some of the weight, when doing so I noticed that of the 4 subs two are SVC's and two are DVC's the box is separated into sides 1 of each on this side and one of each on the other, this setup was originally powered by a kicker 1200.1 but Im doing away with that in favor of my Fosgate 2000.1 but I have a question as to how to wire this setup back up, here are the specs for the subs
memphis m3124
12" M3 single 4 Ohm Series
Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watt
Sensitivity 92.1 dB
Memphis m3122D
12" M3 Dual 2 Ohm Series Subwoofer
Power Handling:
Peak: 800 watts
RMS: 400 watts
Impedance: Dual 2 ohm
Dual 2 ohm voice coils
Sensitivity: 90 dB
memphis m3124
12" M3 single 4 Ohm Series
Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watt
Sensitivity 92.1 dB
Memphis m3122D
12" M3 Dual 2 Ohm Series Subwoofer
Power Handling:
Peak: 800 watts
RMS: 400 watts
Impedance: Dual 2 ohm
Dual 2 ohm voice coils
Sensitivity: 90 dB