How many devices are too much for 12v/remote wire?

jaymann107
10+ year member

Member
currently hooked to my remote wire on my Sony headunit I have an EQ, 3 amps ( RF t8002, sony 4 channel only using 2, and stock bose amp for 6x9's) also have a line driver. Now when I turn my volume up to 18 of 35 on the headunit everything except my head unit turns off (EQ, all amps including my stock amp, and I assume my line driver). The only thing I can think is that there is something going on with my remote wire. This all started happening when I hooked the Sony amp up to the 6.5 in my doors. BUT when my RF amp is turned down through the EQ I can turn the headunit up as loud as I want to. I checked all remote iwre connections and they all look good.

Big 3 done in 0 gauge and a run from stock battery to dist block in 0 gauge. from dist block to both amps are 4 gauge.

Any ideas why this might be happening

 
wire in a relay, i believe this is how it should be wires on a relay

85-Ground

86-Remote turn on from your deck

87-Fused lead from your distro block or other suitable constant +12v

30-Out to all your amps/processors

 
I've searched for a relay at advanced, do any of you have a suggestion on where I can get a relay that I will not have to order online? Thanks for all the help fellas.

 
Thanks guys, I got a relay at Pepboys for 2.99 and everyhting is working as it should. I was also able to hook up a fan to my RF amp with piece of mind.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Alright sorry this took so long. Here's the update. I tried out all the sets of speakers, the black diamonds did not fit front or back. I think if...
23
4K
5 ch amps can get expensive and most of the sub stage lacks power for a decent mid-sized sub. And end up running hot. Some times its best to look...
11
2K
This is a little more money but well worth it from looking at the reviews. And it's Korean.
13
2K
I wouldnt waste the time or money on OEM speakers to be placed back into any vehicle unless you plan to sale the vehicle and remove the after...
4
1K
With half inch MDF, it's like 4.27cu/ft internally not including sub and port displacement. That's like 3.5 to 3.8cu/ft after displacement. You...
3
2K

About this thread

jaymann107

10+ year member
Member
Thread starter
jaymann107
Joined
Location
Orlando, FL
Start date
Participants
Who Replied
Replies
9
Views
2,531
Last reply date
Last reply from
jaymann107
Screenshot_20240609-212906.png

Blackout67

    Jun 9, 2024
  • 0
  • 0
Screenshot_20240609-212805.png

Blackout67

    Jun 9, 2024
  • 0
  • 0

New threads

Top