How low do you go?

[joek86 10+ year member]

If you have a proper sub set up, how low do you let your front stage speakers and rear fills go. Assume very good component 6.5's? I know that it is car dependent, but tell me where you guys are at........

Joe

Click to read more...

 

[jeepintn 10+ year member]

i set mine really high, but its just my preference, i dont really know the "proper" way to do it, i pass mine at like 200HZ

 

[PESteele 10+ year member]

80-100

 

[JimJ 5,000+ posts]

Mine are at 63Hz @ 24dB/oct...

 

[azbass 5,000+ posts]

down to around 80..

 

[joek86 10+ year member]

If you go that high, what do you have your sub set at? Is there a gap in the two?

Joe

 

[phyphoestilic 5,000+ posts]

no gap, u cross from one to the other (crossover).

 

[James Bang 5,000+ posts]

8"s from 80 - 200~hz

 

[joek86 10+ year member]

no gap, u cross from one to the other (crossover).

That is what I am doing, but jeepintn is at 200 with his set up, so I am wondering how he sets his sub...

Joe

 

[phyphoestilic 5,000+ posts]

That is what I am doing, but jeepintn is at 200 with his set up, so I am wondering how he sets his sub...

Joe

Was answering the if there was a gap part of ur question

 

[Duke 10+ year member]

Mid 50s for my fronts.

 

[yacob.naif 10+ year member]

don't forget setting the xover for your sub that high is increasing your impedance rise by quite a bit, and you're losing out on some output on your lows

i set my high pass @ 60hz 18dB/octave, and my low pass @ 55hz 30dB/octave

edit: "that high" was referring to the guy who said he sets his @ 200hz....

 

[T3mpest 10+ year member]

don't forget setting the xover for your sub that high is increasing your impedance rise by quite a bit, and you're losing out on some output on your lows
i set my high pass @ 60hz 18dB/octave, and my low pass @ 55hz 30dB/octave

edit: "that high" was referring to the guy who said he sets his @ 200hz....

mono midbass FTW?