How Do I Wire A Stinger SR200 Battery Isolater?

[HardHittaz00 10+ year member]

I just bought one of these... I have a Kinetik HC2400 in the trunk wired straight to the positive of the stock battery so it can charge... The Kinetik is grounded straight to the frame... Can someone help me with wiring this thing...

Click to read more...

 

[dbornotdb 10+ year member]

One of the big terminals goes to the 1st battery.

The other big terminal goes to the 2nd batery.

One of the small terminals goes to a 12v switched power source. This tell it to allow charging of the 2nd battery when the car is on, and tells it to switch off so the 2nd battery doesn't **** off the 1st one when the car is off.

The other small terminal goes to ground.

 

There is no difference in what small terminal goes where unles is says. In my experience, either one works.

 

[badstang123 10+ year member]

One of the big terminals goes to the 1st battery.The other big terminal goes to the 2nd batery.

One of the small terminals goes to a 12v switched power source. This tell it to allow charging of the 2nd battery when the car is on, and tells it to switch off so the 2nd battery doesn't **** off the 1st one when the car is off.

The other small terminal goes to ground.

 

There is no difference in what small terminal goes where unles is says. In my experience, either one works.

The man is right on. Mine is wired exactly the same //content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif

 

[Loud3 10+ year member]

Ditto. It should have had a wiring diagram on the back of the package, as well.

 

[HardHittaz00 10+ year member]

lol, It didn't come in a package... My buddy cleans out repod cars before they put them in auction, and he snagged it and two 200 amp fuses and fuse holders with alot of zero guage and 2 guage wire... So, I knew what it was, just not how to wire it... I appreciate the help guys...//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif