thizzkid 10+ year member
Member
hi guys im back with a new set up
I purchased a new hifonics BXI1210D from vminovations to connect to my set of pioneer ts308D4 at 1 ohm in a dual ported box, should i be alright? any tips in makin my install better?
Any good ideas on setting the gain or any other settings?
current set up on my Ford 1995 Explorer 4 dr
-kenwood mpc205 HU set to 120hz on LPF setting
-2 12" 308D4 pioneer 400rms each, final impedance is 1 ohm
-Ported box at 1.65-1.70 cu (rough estimate)
-4 gauge wiring from ebay
-1000 cold cranking amp everstart battery from walmart
-partial big 3, 4 gauge from + battery to + on alternator
-80 amp fuse 12 inches from battery
-level 1/2 up, LPF 1/2 up, SUBsonic filter 1/4 up
-stock alternator
any feed back is apreciated, thanks eveyone
I purchased a new hifonics BXI1210D from vminovations to connect to my set of pioneer ts308D4 at 1 ohm in a dual ported box, should i be alright? any tips in makin my install better?
Any good ideas on setting the gain or any other settings?
current set up on my Ford 1995 Explorer 4 dr
-kenwood mpc205 HU set to 120hz on LPF setting
-2 12" 308D4 pioneer 400rms each, final impedance is 1 ohm
-Ported box at 1.65-1.70 cu (rough estimate)
-4 gauge wiring from ebay
-1000 cold cranking amp everstart battery from walmart
-partial big 3, 4 gauge from + battery to + on alternator
-80 amp fuse 12 inches from battery
-level 1/2 up, LPF 1/2 up, SUBsonic filter 1/4 up
-stock alternator
any feed back is apreciated, thanks eveyone
Last edited by a moderator: