Help

[Hitch16]

Can I hook two 15" Diamond D6 Subs to an Alpine mono MRD-M501 4ohms 275Wx1, 2ohms 550Wx1. Help me out

Click to read more...

 

[Kangaroux 5,000+ posts]

2 Dual 6ohm subs wire down to 1.5ohms, your amp is only stable at 2. You could most likely do it, but I would keep an eye on your amp for any overheating. As for actually wiring it you would do this:

 

[LosIsATool 5,000+ posts]

I think he meant the D6 not dual 6.. OP are your subs Dual 4

 

[LosIsATool 5,000+ posts]

Those are 600 RMS you would be better off running 1 sub.

 

[Kangaroux 5,000+ posts]

I think he meant the D6 not dual 6.. OP are your subs Dual 4

Not familiar with Diamond's product lines..my bad.

OP in that case I wouldn't wire it to that amp unless you wire it to 4 ohms, which is most likely a waste of time. Your best bet is finding an amp that can power the 2 properly and is 1 ohm stable.

 

[Heavylifter 10+ year member]

I had two Diamond M3 15's years ago running off a Rockford bd500.1 and it sounded great. It should do until you get a bigger amp.