Help! with PG RSD's

[NoobieAudio 10+ year member]

can you find a song with quick kick drum for me and record um please?

 

[NoobieAudio 10+ year member]

i wanna see how the ported box and those sound with "drum check" by morbid angel

 

[dman4486 5,000+ posts]

i got three of those subs sitting on my table . gonna run them with a hifonics bxi1606d. i am pretty sure im gonna run a sealed box though

>1100 watts will probably be fine for 3 in sealed, and ill have to record the drum tomorrow.....

find me a song with double bass kick and ill see about the vid when i get up

 

[dman4486 5,000+ posts]

hah....alright

let me download and ill get the vid up tomorrow

 

[NoobieAudio 10+ year member]

my amp runs 1600 rms. they are 500rms subs. i'll have um wired at 1.34ohms. i think it'll rock some socks off. running with my infinity perfect 6.1's

 

[dman4486 5,000+ posts]

my amp runs 1600 rms. they are 500rms subs. i'll have um wired at 1.34ohms. i think it'll rock some socks off. running with my infinity perfect 6.1's

if you are planning on running 3 of the rsd's you will not get the 1600 rms from that amp

and they are 350rms as stated by pg rep

edit: the rsd are 4ohm dvc so you could run them series/parallel and get 2.67...also know that mine metered at 3.6ohm idle

 

[NoobieAudio 10+ year member]

three single 4 ohm ran in series is 1.34ohm

 

[NoobieAudio 10+ year member]

well 300w/500w rms-peak

 

[dman4486 5,000+ posts]

three single 4 ohm ran in series is 1.34ohm

so you will only be running one coil on each sub?

 

[NoobieAudio 10+ year member]

so you will only be running one coil on each sub?

yes

 

[NoobieAudio 10+ year member]

here this'll be easier. http://rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=3&woofer_imp=1

 

[dman4486 5,000+ posts]

if you plan on running anywhere near 1600 rms on one vc/sub, then you are going to burn them up quick

 

[tcguy85 10+ year member]

hah....alright
let me download and ill get the vid up tomorrow

i need to make a vid of my mirrors shaking from just my rsd mids(no sub) with some fast double bass. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[dman4486 5,000+ posts]

i need to make a vid of my mirrors shaking from just my rsd mids(no sub) with some fast double bass. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

i dont know what the frequency is of a bass drum, but im gonna give it a shot...maybe my lpf wont be set too low

edit: i am contemplating a 6.5" fabrication in the front doors so i can get a set....

 

[NoobieAudio 10+ year member]

if you plan on running anywhere near 1600 rms on one vc/sub, then you are going to burn them up quick

well i plan on giving 1200 rms divided to them all