Help! with PG RSD's

[dman4486 5,000+ posts]

well i plan on giving 1200 rms divided to them all

if the sub is 300 rms, then each coil is 150, and 150*3=450...you will burn them up

 

[NoobieAudio 10+ year member]

if the sub is 300 rms, then each coil is 150, and 150*3=450...you will burn them up

it is a single coil sub. it wouldn't be 300rms if it couldn't do 300rms.

 

[dman4486 5,000+ posts]

it is a single coil sub. it wouldn't be 300rms if it couldn't do 300rms.

rsd's are a dvc sub...i already did the install i know they are

edit: go to rodinaudio.com and look at them

 

[NoobieAudio 10+ year member]

what coil do you have?

 

[dman4486 5,000+ posts]

what coil do you have?

my bad...i forgot they made the rsd10d and the rsd10........you will be fine

i have the rsd10d which is dual 4ohm

 

[NoobieAudio 10+ year member]

... lol okay. well yeah the sub is 50-500w RMS 700 peak. i can give them 1500 and be fine but i will probley won't run that daily driving

 

[NoobieAudio 10+ year member]

350rms is average rating rms.

 

[dman4486 5,000+ posts]

... lol okay. well yeah the sub is 50-500w RMS 700 peak. i can give them 1500 and be fine but i will probley won't run that daily driving

get some vids up after install...i downloaded "drum check" and will post vid when i wake up in the morn

 

[dman4486 5,000+ posts]

350rms is average rating rms.

yea...that is what phil from pg told me a while back.....I got the rsd's before they had all the information correct on the website, and in the owners manual!!

when i emailed phil about the specs, he responded that all were wrong, and sent me a pdf of the corrected theile.

 

[NoobieAudio 10+ year member]

well it will be a bit. i am slightly torn between sealed and ported so i having been stalling to make the box. and hopefully i won't have any flex like you do. im and also sound damping almost everything

 

[NoobieAudio 10+ year member]

well it will be a bit. i am slightly torn between sealed and ported so i having been stalling to make the box. and hopefully i won't have any flex like you do. im and also sound damping almost everything

well you can talk to them and get the right info but they never updated the site for it. told me they figure 350 is always a safe number and people should tell wether or not to give them more juice

 

[dman4486 5,000+ posts]

well it will be a bit. i am slightly torn between sealed and ported so i having been stalling to make the box. and hopefully i won't have any flex like you do. im and also sound damping almost everything

i need to dampen the roof of my passport, it pisses me off, but i don't have the cash for that now:crap:

 

[NoobieAudio 10+ year member]

so far i only got my doors done. huge differnence already. waiting on some different thermal stuff for the roof them probley do a layer of acuostic foam

 

[dman4486 5,000+ posts]

well you can talk to them and get the right info but they never updated the site for it. told me they figure 350 is always a safe number and people should tell wether or not to give them more juice

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif from what i have seen, 800rms is the most per sub

 

[dman4486 5,000+ posts]

so far i only got my doors done. huge differnence already. waiting on some different thermal stuff for the roof them probley do a layer of acuostic foam

i just want to get rid of the flex....it gets really annoying when i listen to alice in chains and the bass makes the roof rattle on the crossbars