Help with my design

[ChevelleMan73 10+ year member]

Hey you guys, I was wondering if anyone could check my specs on the box I designed for a 03 kicker cvr10. It should be 1.592 CF^3 tuned to 29Hz. Could someone check this for any mistakes. It would be greatly appreciated. Oh yeah the port is 1.25"x13.5"

Thanks for your help

ChevelleMan73

Click to read more...

 

[PowerNaudio 10+ year member]

quick q?

whats the distance from the back of the port to the imidate wall infront of it?.

if its not over 1.5" then it counts as part of the port and extend the port lenght by 2.5".

also you canot measure the port lenght by the length of the port walls, the port extend fronm the front of the port to the midd point of the port corner and then from that point to the end of the port.

what is the port lengh you calculated for this enclosure?.

 

[ChevelleMan73 10+ year member]

The port length I calculated is 30.25" And the port is 2" away from the wall.

Thanks for your help

 

[PowerNaudio 10+ year member]

is that double baffle trughout the whole enclosure?

 

[ChevelleMan73 10+ year member]

What do you mean double baffle? Do you mean the port? If so No It stops 2" away from the right side.

 

[Pyro_By_Nature 5,000+ posts]

Is it designed to have two layers of wood all around is what he's asking?

 

[PowerNaudio 10+ year member]

i meant, it looks like there are two pieses to each wall.

edit: what he sayed. lol

 

[ChevelleMan73 10+ year member]

Ohhhh, No it is a single 3/4" wall box. Its the modelling program that makes it look like that. So did I mess up my calculations at all? or does the box look sound?