platinumjason
Member
I need to either build a box or have a box built for a single Sundown SA-12. I'm debating on building it myself vs having one built. I know aside from the wood there are other random things needed like titebond, screws, liquid nail, resin possibly other things???
I was just wondering if someone might be able to give me a little insight on the cost of building a single enclosure about 1.5 - 1.7 cubes with a slot port about 32 - 34hz.
The part that is making me debate on building vs having it made is that if its only $20-$40 more expensive to have it built that I'd rather do that knowing that if I get it from a reputable builder it will be done right instead of me doing it and possibly running into issues.
Here is some info on my setup
(1) Sundown SA-12
Audiopipe APSM-1500
Height - 14"
Width - 31"
Depth - Approx 14"
Will be going in the trunk of a 97 Civic. I could probably go more on the depth but would like enough room to fit a golf bag in the back with them.
I'm located in West Michigan if someone may be interested in building one for me.
I was just wondering if someone might be able to give me a little insight on the cost of building a single enclosure about 1.5 - 1.7 cubes with a slot port about 32 - 34hz.
The part that is making me debate on building vs having it made is that if its only $20-$40 more expensive to have it built that I'd rather do that knowing that if I get it from a reputable builder it will be done right instead of me doing it and possibly running into issues.
Here is some info on my setup
(1) Sundown SA-12
Audiopipe APSM-1500
Height - 14"
Width - 31"
Depth - Approx 14"
Will be going in the trunk of a 97 Civic. I could probably go more on the depth but would like enough room to fit a golf bag in the back with them.
I'm located in West Michigan if someone may be interested in building one for me.