Help With AMP in setup

[ConceptRacing 10+ year member]

I have asked around before but i just want to get this straight, what amp would you guys recommend for these subs and what ohms do you think i should push them at 1? They are DVC subs.

Click to read more...

 

[mamey69 10+ year member]

How much money you want to spend??

 

[ConceptRacing 10+ year member]

well first can you go to this site and tell me if there is anything there that will work with the subs, i get it cheap there. http://www.circuitcity.com/searchresults.jsp?c=1&b=g&catoid=-8865&department=Car+Electronics&first=yes&qp=0

If there is nothing there, something no more than $300 dollars thats all i really can afford! But the amps at that site pick out any one!

 

[ConceptRacing 10+ year member]

ANYONE??

 

[DaBaller504 10+ year member]

First off don't buy volfenhag. It's a knock off brand that aren't any good. Whats the cost of 1? Also if you're only getting one, and its DVC 4ohm you can't wire 1 ohm!

 

[ConceptRacing 10+ year member]

I need to wire them at 2 ohms each, parrellel or series (I DONT KNOW WHICH) to get the best spl... ... WHAT MTX amp should i get for it?

 

[DaBaller504 10+ year member]

First off are you getting the volfenhags?

Alrite if you wire the subs together you can get a 1 or 4 ohm load. If you buy a mono amp stable to 1 ohm you can wire to 1 ohm.

You can also wire the subs separately. You can wire each sub to 2 or 8 ohms. You will need a 2 ch amp for this.

Ok amp options for best bet

1. Mono amp stable to 1 ohm (wire subs together for a 1 ohm load)

2. 2 ch amp 2 ohm stable-wire subs separately and have a 2 ohm load on each sub