hi
i am new here and i need your help to tune my sound system.
here in my country there no technicians or even enthusiasts able to tune my system.
i have at the moment the following components:
HEADUNIT specs:
alpine cde193bt 6 channel
Sound Tuning
Subwoofer Level Adjustment: 0 to 15 dB
Subwoofer Phase Setting: 0° or 180°
BASS ENGINE SQ: Level 0 - 6
Bass Level Control Range: ±9.1 dB at 100Hz
Treble Level Control Range: ±9.1 dB at 10 kHz
Parametric Equalizer (Band 1): 20 - 100 Hz
Parametric Equalizer (Band 2): 63 - 315 Hz
Parametric Equalizer (Band 3): 125 - 500 Hz
Parametric Equalizer (Band 4): 250 - 1k Hz
Parametric Equalizer (Band 5): 500 - 2k Hz
Parametric Equalizer (Band 6): 1k - 4k Hz
Parametric Equalizer (Band 7): 2k - 7.2k Hz
Parametric Equalizer (Band 8): 5.8k - 12k Hz
Parametric Equalizer (Band 9): 9k - 20k Hz
Parametric Equalizer (Gain): -7 to 0 +7
Parametric Equalizer (Bandwidth): 3, 4, 5
2Way Crossove Mode: Cut-off Frequency 20-200Hz, Slope Flat/6/12/18/24 dB/oct, Level -12 to 0dB
3Way Crossover Mode: Cut-off Frequency Low/Mid Low 20-800Hz Mid High 20-20kHz High 1k-20kHz, Slope Flat/6/12/18/24 dB/oct, Level -12 to 0dB
Application Volume Level Setting: ±14 dB
AMP specs:
Pioneer gm-d9605
•5 Channel Champion Series Class D Amplifier
•Max Power Rating:
?4 ohms: 150 watts x 4 chan. + 700 watts x 1 chan.
?2 ohms: 200 watts x 4 chan. + 1200 watts x 1 chan.
?Bridged, 4 ohms: 400 watts x 2 chan.
•RMS Power Rating:
?4 ohms: 75 watts x 4 chan. + 350 watts x 1 chan.
?2 ohms: 100 watts x 4 chan. + 600 watts x 1 chan.
?Bridged, 4 ohms: 200 watts x 2 chan.
•Total power output: 2000 watts Max
•CEA-2006 Compliant Amplifier
•Pulse Width Modulated MOSFET power supply
•Wired remote bass boost level control included
•LED power (green) and protect (red) indicators
•Soft start turn-on
•Speaker-level (high-level) inputs
•5, 4 or 3 channel operation
•Dedicated, large-block subwoofer terminal output
•Nickle-plated RCA, Speaker and Power/Ground Terminals
•Selectable input modes:
?Front two channels (RCA Only) can provide signal to remaining channels
?Four channel High-Level connection can provide signal to Subwoofer channel
•3-way protection circuitry (thermal, overload, and speaker short protection)
•Heavy duty aluminum alloy heat-sink for extreme heat dissipation
•Input sensitivity:
?Low level: 200mV - 6.5V
?High level: 800mV - 16V
•A/B Channel Frequency Response: 10 - 50,000 Hz (+0dB, -3dB)
•Sub-Channel Frequency Response: 10 - 500 Hz (+0dB, -3dB)
•Total Harmonic Distortion (THD): 0.05%
•Signal to Noise Ration: 94 dB
•Selectable crossover filter (Ch 1 - 4): LPF / OFF / HPF
•Variable crossover filter (Ch 1 - 4): 40 - 500 Hz, 12 dB/octave
•Variable low-pass filter (Sub): 40 - 500 Hz, 24 or 12 dB/octave
•Variable Bass Boost (Via Remote): 0 to +18 dB bass boost at 50 Hz
•Fuse Rating: 30A x 3
•8 - 16 Gauge speaker terminal outputs
front splits system
kicker css65
General Features:
6.5" Two-Way Component System
Power Handling:
Peak: 600 watts per set / 300 watts each side
RMS: 200 watts per set / 100 watts each side
Polypropylene cone
UV-treated, ribbed midwoofer surround
3/4" Titanium dome tweeter
4 ohms impedance
Frequency Response: 35-21,000 Hz
Bottom-mount Depth: 1-11/16"
Tweeter flush-mount depth: 9/16"
Sensitivity: 90dB
High frequency output attenuation: 0, 3, 6
High Pass, dB at frequency: 12, 4,000
Low Pass, dB at frequency: 12, 4,000
Midwoofer grilles included
rear coaxials
kicker csc65
General Features:
6-1/2" CS Series 2-Way Coaxial Speakers
Power Handling:
Peak: 600 watts per pair / 300 watts each
RMS: 200 watts per pair / 100 watts each
Recommended Power Range: 10 - 100 watts RMS per channel
Features EVC (Extended Voice Coil) technology - immediate improvement above OEM
Polypropylene mid-woofer cone material
Polyester foam speaker surround
1/2" Polyether imide (PEI) balanced dome tweeter
Neodymium magnet motor structure
Stamped steel frame basket
Top-mount Depth: 1-11/16"
Cutout Dimensions: 4-13/16"
4 ohms impedance
Frequency Response: 40 - 20,000 Hz
Sensitivity: 90dB
subwoofer
rockford p2d215
15" subwoofer with dual 2-ohm voice coils
molded polypropylene woofer cone with poly-foam surround
"Venturi-effect" design for maximum cooling of motor structure
power range: 50-250 watts RMS (500 watts peak power)
frequency response: 20-250 Hz
sensitivity: 86 dB
top-mount depth: 7-1/8"
sealed box volume: 1.3-3.5 cubic feet
ported box volume: 2.66 cubic feet
warranty: 1 year
the amp is connected to headunit with a stinger cable :
Stinger SI4612 Audio RCA Interconnect Cable 6 Channels 4000 Series 12 ft Stereo
i like bass and not too much treble.
my car is a small hatchback (smaller than golf and bigger than yaris). the tweeters are mounted on doors near A-pillars.
i am new here and i need your help to tune my sound system.
here in my country there no technicians or even enthusiasts able to tune my system.
i have at the moment the following components:
HEADUNIT specs:
alpine cde193bt 6 channel
Sound Tuning
Subwoofer Level Adjustment: 0 to 15 dB
Subwoofer Phase Setting: 0° or 180°
BASS ENGINE SQ: Level 0 - 6
Bass Level Control Range: ±9.1 dB at 100Hz
Treble Level Control Range: ±9.1 dB at 10 kHz
Parametric Equalizer (Band 1): 20 - 100 Hz
Parametric Equalizer (Band 2): 63 - 315 Hz
Parametric Equalizer (Band 3): 125 - 500 Hz
Parametric Equalizer (Band 4): 250 - 1k Hz
Parametric Equalizer (Band 5): 500 - 2k Hz
Parametric Equalizer (Band 6): 1k - 4k Hz
Parametric Equalizer (Band 7): 2k - 7.2k Hz
Parametric Equalizer (Band 8): 5.8k - 12k Hz
Parametric Equalizer (Band 9): 9k - 20k Hz
Parametric Equalizer (Gain): -7 to 0 +7
Parametric Equalizer (Bandwidth): 3, 4, 5
2Way Crossove Mode: Cut-off Frequency 20-200Hz, Slope Flat/6/12/18/24 dB/oct, Level -12 to 0dB
3Way Crossover Mode: Cut-off Frequency Low/Mid Low 20-800Hz Mid High 20-20kHz High 1k-20kHz, Slope Flat/6/12/18/24 dB/oct, Level -12 to 0dB
Application Volume Level Setting: ±14 dB
AMP specs:
Pioneer gm-d9605
•5 Channel Champion Series Class D Amplifier
•Max Power Rating:
?4 ohms: 150 watts x 4 chan. + 700 watts x 1 chan.
?2 ohms: 200 watts x 4 chan. + 1200 watts x 1 chan.
?Bridged, 4 ohms: 400 watts x 2 chan.
•RMS Power Rating:
?4 ohms: 75 watts x 4 chan. + 350 watts x 1 chan.
?2 ohms: 100 watts x 4 chan. + 600 watts x 1 chan.
?Bridged, 4 ohms: 200 watts x 2 chan.
•Total power output: 2000 watts Max
•CEA-2006 Compliant Amplifier
•Pulse Width Modulated MOSFET power supply
•Wired remote bass boost level control included
•LED power (green) and protect (red) indicators
•Soft start turn-on
•Speaker-level (high-level) inputs
•5, 4 or 3 channel operation
•Dedicated, large-block subwoofer terminal output
•Nickle-plated RCA, Speaker and Power/Ground Terminals
•Selectable input modes:
?Front two channels (RCA Only) can provide signal to remaining channels
?Four channel High-Level connection can provide signal to Subwoofer channel
•3-way protection circuitry (thermal, overload, and speaker short protection)
•Heavy duty aluminum alloy heat-sink for extreme heat dissipation
•Input sensitivity:
?Low level: 200mV - 6.5V
?High level: 800mV - 16V
•A/B Channel Frequency Response: 10 - 50,000 Hz (+0dB, -3dB)
•Sub-Channel Frequency Response: 10 - 500 Hz (+0dB, -3dB)
•Total Harmonic Distortion (THD): 0.05%
•Signal to Noise Ration: 94 dB
•Selectable crossover filter (Ch 1 - 4): LPF / OFF / HPF
•Variable crossover filter (Ch 1 - 4): 40 - 500 Hz, 12 dB/octave
•Variable low-pass filter (Sub): 40 - 500 Hz, 24 or 12 dB/octave
•Variable Bass Boost (Via Remote): 0 to +18 dB bass boost at 50 Hz
•Fuse Rating: 30A x 3
•8 - 16 Gauge speaker terminal outputs
front splits system
kicker css65
General Features:
6.5" Two-Way Component System
Power Handling:
Peak: 600 watts per set / 300 watts each side
RMS: 200 watts per set / 100 watts each side
Polypropylene cone
UV-treated, ribbed midwoofer surround
3/4" Titanium dome tweeter
4 ohms impedance
Frequency Response: 35-21,000 Hz
Bottom-mount Depth: 1-11/16"
Tweeter flush-mount depth: 9/16"
Sensitivity: 90dB
High frequency output attenuation: 0, 3, 6
High Pass, dB at frequency: 12, 4,000
Low Pass, dB at frequency: 12, 4,000
Midwoofer grilles included
rear coaxials
kicker csc65
General Features:
6-1/2" CS Series 2-Way Coaxial Speakers
Power Handling:
Peak: 600 watts per pair / 300 watts each
RMS: 200 watts per pair / 100 watts each
Recommended Power Range: 10 - 100 watts RMS per channel
Features EVC (Extended Voice Coil) technology - immediate improvement above OEM
Polypropylene mid-woofer cone material
Polyester foam speaker surround
1/2" Polyether imide (PEI) balanced dome tweeter
Neodymium magnet motor structure
Stamped steel frame basket
Top-mount Depth: 1-11/16"
Cutout Dimensions: 4-13/16"
4 ohms impedance
Frequency Response: 40 - 20,000 Hz
Sensitivity: 90dB
subwoofer
rockford p2d215
15" subwoofer with dual 2-ohm voice coils
molded polypropylene woofer cone with poly-foam surround
"Venturi-effect" design for maximum cooling of motor structure
power range: 50-250 watts RMS (500 watts peak power)
frequency response: 20-250 Hz
sensitivity: 86 dB
top-mount depth: 7-1/8"
sealed box volume: 1.3-3.5 cubic feet
ported box volume: 2.66 cubic feet
warranty: 1 year
the amp is connected to headunit with a stinger cable :
Stinger SI4612 Audio RCA Interconnect Cable 6 Channels 4000 Series 12 ft Stereo
i like bass and not too much treble.
my car is a small hatchback (smaller than golf and bigger than yaris). the tweeters are mounted on doors near A-pillars.