I am fairly new at the amplified sub scene so i was hoping a few of you could help me figure out what would be my best choice.
Right now i have an Alpine CDM-9801 hu, kinda low end, but it works. I have a couple sets of Polk Audio speakers installed in the doors and mids. I need a little bass to help things out. I pick up a Dual 10" SBP10 sub powered by a Dual 300w 2 channel (bridged) amp. This too is very low end but it was cheap, so i snagged it. It has a bandpass style box which i have read is for maximum boom. I listen to rock not rap so i thought about building my own sealed enclosure for the Dual woofer to make the bass a little tighter.
Somewhere i read where 1 to 1.25 cubic feet of volume is need for a sealed box enclosure. Is this all dependent on the speaker too?
This is going into a 96 Bronco, full size. What would be a good woofer choice, running about 200 to 300w, to go into a homemade sealed box for $100 or less? and how much box volume is needed with it?
Thanks, Jerry.
Right now i have an Alpine CDM-9801 hu, kinda low end, but it works. I have a couple sets of Polk Audio speakers installed in the doors and mids. I need a little bass to help things out. I pick up a Dual 10" SBP10 sub powered by a Dual 300w 2 channel (bridged) amp. This too is very low end but it was cheap, so i snagged it. It has a bandpass style box which i have read is for maximum boom. I listen to rock not rap so i thought about building my own sealed enclosure for the Dual woofer to make the bass a little tighter.
Somewhere i read where 1 to 1.25 cubic feet of volume is need for a sealed box enclosure. Is this all dependent on the speaker too?
This is going into a 96 Bronco, full size. What would be a good woofer choice, running about 200 to 300w, to go into a homemade sealed box for $100 or less? and how much box volume is needed with it?
Thanks, Jerry.
