help getting wires through doors

[ccapital83 10+ year member]

is there any majic tip to het these through i cannot get it to flex enough to get through i tried a hanger but theres to much of a bend in the door to get a hanger through any tips?

Click to read more...

 

[bhsdriller 10+ year member]

Through the factory rubber thing? It took me a while to get it but I got them fed through.

You can get the wire part way than try to grab it with a pair of needle nose pliars

 

[ccapital83 10+ year member]

thanks my rubber part is so bendy i cant get pliers through it bend like a big u

 

[daboyfrumdabx 10+ year member]

thanks my rubber part is so bendy i cant get pliers through it bend like a big u

Can you disconnect the grommet from both sides, the door and the car? That's what I did. I disconnected both end so that I could hold it in a straight line to eliminate the big U. You can also try a metal coat hanger or something of the sort.

 

[bhsdriller 10+ year member]

disconnect it from the door and car, makes it a little easier. You probably won't be able to straighten it out

Work it through with your fingers

 

[ccapital83 10+ year member]

wow what a nightmare finally got it pulling off the rubbe hose from both sides helped alot.

 

[Brewiz]

Large Ty-Wraps (12-14") work good, you can cut the lock end off and drill a small hole in it to tie a chase wire to.