HELP ASAP W/ Setup

Originally posted by ConceptRacing So that amp would be plenty for the volfenhags, it will push them hard enough, basically 500w to each sub at 1 ohm, do i need capacitors or anything? How is tsunmai wiring? IS IT ANY GOOD.?
The amp is fine. If your subs have 500 RMS, only send them 500. You won't need a cap. And wire is pretty much wire, the cheaper the better. The kits at Wal-Mart get the job done.

 
The amps we carry are MTX, And the pMiller, Know any good mtx that would work great?? I mean i need to save money here and i can get a 600$ mtx amp for like 350, so do you know any of those? Also, when you said 1000w x 1ohm, that means i can hook up both volfenhags to it for 500w x 1 ohm right? I am just trying to learn, Thanks gauntlet, you have been a great help so far! If you have time go to this site and pick out a amp that you think would be perfect for it, its where i work... http://www.circuitcity.com/searchresults.jsp?c=1&b=g&catoid=-8865&department=Car+Electronics&first=yes&qp=0

 
I hate to be the bearer of bad news, but the MTX's aren't 1 ohm stable, and that would be the ideal impedance to run your subs at. I say go for that Hifonics. It'll power the subs nicely, and it costs less than the MTX you can get for $350.

 
we carry other amps other than mtx, go there and see what you think. If there isnt one that you think will fit my needs i will get the hifonics amp! Thanks gauntlet

 
Originally posted by ConceptRacing we carry other amps other than mtx, go there and see what you think. If there isnt one that you think will fit my needs i will get the hifonics amp! Thanks gauntlet
Well I'm not going to go there, but the amps listed on their website weren't all that great.

 
Originally posted by ConceptRacing we carry other amps other than mtx, go there and see what you think. If there isnt one that you think will fit my needs i will get the hifonics amp! Thanks gauntlet
I went there and stay with the amp guantlet told you it is better than any at that site.
 
Gauntlet, would you mind giving me a crash course on audio, basically what efficency is, and what is the best. and so on, just basics i should know? Can you do that

 
Originally posted by ConceptRacing Gauntlet, would you mind giving me a crash course on audio, basically what efficency is, and what is the best. and so on, just basics i should know? Can you do that
I could, but that'd be a hell of a lot of typing. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Go here http://www.eatel.net/~amptech/elecdisc/caraudio.htm and come back with any specific questions you may have,

 
Originally posted by Gauntlet I could, but that'd be a hell of a lot of typing. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Go here http://www.eatel.net/~amptech/elecdisc/caraudio.htm and come back with any specific questions you may have,
read everything multiple times. from start to end. you'll know more than a lot of people in the car audio business...and even on this forum. sadly i haven't had enough time to read the whole site....but soon....

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

ConceptRacing

10+ year member
Junior Member
Thread starter
ConceptRacing
Joined
Location
STL
Start date
Participants
Who Replied
Replies
23
Views
1,167
Last reply date
Last reply from
fantomas
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top