***Help a newb pick a sub***

[Cole Trickle 10+ year member]

Afternoon,

Starting to aquire parts for a build in the new commuter car.(HHR SS)

I picked up an ED nine.5 amp to power the whole system.

Thinking about some CDT 6.5 seperates for the doors and I want to pick a sub that will work well.

I am going to a build a sealed box that sits flush down in the spare tire well. I am gonna leave the spare/jack so the box will only be able to accomadate 1 sub. I imagine I can get about 1-1.5' if I glass down into the flipped spare tire....This will also give me room to flush the sub with the floor.(thinking 12)

I would like to find a sub that will work well in a sealed box that size and that runs at 1ohm so I can get the 600w out of the amp.(excuse my ignoraance but I have always been a retard when it comes to ohms law//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

Thoughts?

Brandin

Click to read more...

 

[bsean63 10+ year member]

budget?

 

[Cole Trickle 10+ year member]

budget?

$300.00 and under

I prefer bang for the buck

 

[James Bang 5,000+ posts]

I'll recommend a iDmax D2. It'll do well with 1.3cuft sealed. efficient and sounds great.

That amp is rated to 600w @ 12.5v iirc, so it'll do a little more than 600w, which would be great for an iDmax

 

[Cole Trickle 10+ year member]

I'll recommend a iDmax D2. It'll do well with 1.3cuft sealed. efficient and sounds great.
That amp is rated to 600w @ 12.5v iirc, so it'll do a little more than 600w, which would be great for an iDmax

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=6225

Is this what your talking about?(I have been looking at that sub for a week...Is there better pricing elsewhere?)

I know it's a retarded question but how do you wire it for 1ohm?

 

[skateboardkid 10+ year member]

The new Mag should be here sooner than later and should be pretty ideal for your setup

http://stereointegrity.com/mag.php

early reviews rave about its output and SQ.

The ID sub is very nice for what it is.

 

[Cole Trickle 10+ year member]

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=6225
Is this what your talking about?(I have been looking at that sub for a week...Is there better pricing elsewhere?)

I know it's a retarded question but how do you wire it for 1ohm?

Bump...

Anyother ideas?//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif