HDC310-A Help

[MikesJeepTj]

Im looking to buy a SoundQubed HDC310-A, and had an impedance selector. What impedance should I choose D1 or D2 for the Q1-1200D. Help would be greatly appreciated.

Click to read more...

 

[Side Show 10+ year member]

whats that amp stable down too?

 

[NASTY08IMPALA 5,000+ posts]

d2 wired down to 1 ohm

 

[mlstrass 5,000+ posts]

Do NOT get an aluminum coil sub for that power level. Get the copper coil version, D2 and wire to 1ohm....

 

[NASTY08IMPALA 5,000+ posts]

Do NOT get an aluminum coil sub for that power level. Get the copper coil version, D2 and wire to 1ohm....

^^^this .the copper coil will be louder on that power

 

[MikesJeepTj]

Ok thanks for input on copper coil, and wiring to 1ohm would just be bridging or do you have to do something special?

 

[MikesJeepTj]

Sorry for dumb questions, new to this, but how do you figure how much cubic ft. the sub needs inside the box? And would anything you guys said change if i bumped up to a Q1-2200D?

 

[mlstrass 5,000+ posts]

I'd still do copper for a 2200 @ 1ohm. Parallel POS wires together and NEG wires together on the sub = 1ohm load.

I normally do 1.5cubes net for a 10" AQ sub...