Sold Have $$$ need 1/0 wire NOW!

[basscort2009 5,000+ posts]

ok i got 70 bucks. i need about 50 ft of knu or equal wire. i want kicker but no one will get rid of there hyperflex for some reason nowadays. i dont wanna buy peices unless there alltogether and at least 17 ft in length each. OFFER UP!

Click to read more...

 

[basscort2009 5,000+ posts]

just get some welding cable. i get rolls of 50ft for $70 usually

havnt found a good welding cable here yet. need to google a welding shop i guess

 

[basscort2009 5,000+ posts]

KLMX is plenty flexable... heres a shot of my 1/0 that has been in the garage for all night and all this morning, the garage is sitting at about 40*F.... If I try I can get it even smaller but that was just a quick loop and pull...

thats a big help. thanks man. im thinkin bout getting that knu wire then

 

[Korn4Life 5,000+ posts]

I will sell you 17" ft of Kicker Hyperflex for $70 no problem!!! LOL

 

[99grandprixGT 5,000+ posts]

its not BAD to work with ive used both, when im doing it again im going to save up and go with the hyperflex. i bought it for one of my cars since im not doing multiple runs, but next one im getting hyperflex to do 4 runs.

 

[basscort2009 5,000+ posts]

I will sell you 17" ft of Kicker Hyperflex for $70 no problem!!! LOL

i bet you would -_-

its not BAD to work with ive used both, when im doing it again im going to save up and go with the hyperflex. i bought it for one of my cars since im not doing multiple runs, but next one im getting hyperflex to do 4 runs.

yea i really want hyperflex though so i am still undecided to what i wanna do. i wish someone would do me a partial trade for my 4/0 wire

 

[Korn4Life 5,000+ posts]

how much 4/0 u have?

 

[basscort2009 5,000+ posts]

14.5 ft

 

[basscort2009 5,000+ posts]

check my FS ad

 

[k_schutte 10+ year member]

I have used Stinger Hyperflex, Stinger PRO, Street wires, KLMX, Monster, Tsunami, R.F., a few different welding cables and some off brand crap as well...

Hyperflex is awesome but expensive as **** and personaly I don't need wire that is so flexable as I have no sharp corners at all really...

KLMX is awesome, still pretty dang flexable and CHEAP but is CCA...

Monster is awesome because it is big, atleast the older stuff I used was bigger than AN Yother 1/0 I have tried and VERY close to teh same size as my 2/0 as far as teh copper goes. Total size it was close to my 4/0 because it had a THICK jacket! however it is about as flexable as most 2/0 welding cable...

 

[basscort2009 5,000+ posts]

I have used Stinger Hyperflex, Stinger PRO, Street wires, KLMX, Monster, Tsunami, R.F., a few different welding cables and some off brand crap as well...
Hyperflex is awesome but expensive as **** and personaly I don't need wire that is so flexable as I have no sharp corners at all really...

KLMX is awesome, still pretty dang flexable and CHEAP but is CCA...

Monster is awesome because it is big, atleast the older stuff I used was bigger than AN Yother 1/0 I have tried and VERY close to teh same size as my 2/0 as far as teh copper goes. Total size it was close to my 4/0 because it had a THICK jacket! however it is about as flexable as most 2/0 welding cable...

how much differance you think it will make being cca and not ofc copper?

 

[k_schutte 10+ year member]

how much differance you think it will make being cca and not ofc copper?

to be 100% honest, I have NO clue... when I went from my Monster cable (OFC) to the KLMX there was absolutely NO change in anything. Remembering that the KLMX is "oversized", which might have something to do with that... In case you are wondering, I had like 8ft extra of the Monster cable laying in the trunk of the cadillac and came up a couple feet short in the Astro so I swapped them out. Ended up sellign the Astro and then putting the Monster back i the car but only because I like the look of it better. (clear jacket)

heres a good read... OFC vs. CCA (KLMX vs FLEKS vs 3 others)

http://www.bladeice.com/KnuKoncepts%2010.09%20V3.pdf

So basicaly, IMO not worth all the extra money for OFC... Not in my applications anyways...

 

[Korn4Life 5,000+ posts]

I think i remember reading the 1/0 CCA wire is only good up to 250 amps

 

[Korn4Life 5,000+ posts]

That 4/0 got me thinking. I have to see if 14.5ft is enough though

 

[basscort2009 5,000+ posts]

ok guys i think im going with the lowline oversized knu wire then. anyone wanna buy my 4/0 //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[mbrooky 10+ year member]

$87 will get you 40' shipped....KLM

http://cgi.ebay.com/KnuKonceptz-Metallic-Blue-1-0-Gauge-Power-Wire-20-Feet_W0QQitemZ380180933306QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item58848caaba

http://cgi.ebay.com/KnuKonceptz-Metallic-Black-1-0-Gauge-Power-Wire-20-Feet_W0QQitemZ390114721326QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item5ad4a63e2e

http://cgi.ebay.com/KnuKonceptz-Metallic-Red-1-0-Gauge-Power-Wire-20-Feet_W0QQitemZ380176496053QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item588448f5b5

ultraflex: $3.40/ft //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif ....comes to about 20ft for $70

http://cgi.ebay.com/KnuKonceptz-Ultra-Fleks-1-0-Power-Wire-0-Gauge-Blue_W0QQitemZ390116805409QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item5ad4c60b21

this seems like a good deal if you got the money...and best offer too...maybe offer $130 that comes out to $2.60 a ft shipped (or $3/ft at asking price shipped)

http://cgi.ebay.com/Kicker-05PWG050-50-0-1-Gauge-wire-Ground-Cable-Gray_W0QQitemZ160370445778QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2556d2cdd2

http://cgi.ebay.com/Kicker-05PWB050-50-0-1-Gauge-wire-Power-Cable-Blue_W0QQitemZ160370444515QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2556d2c8e3