Ground Connections.

[MmatsDude 10+ year member]

How many grounds do you guys do to your rear batts other than the chassis to batt. Do you guys run more grounds to it?

Click to read more...

 

[Dre20xl 10+ year member]

ground to chassis or if you have enough wire you could run a ground all the way to the front, ether way your good as long as the wire awg is = to or big than the power wire.

 

[MmatsDude 10+ year member]

ite thanks man..

how about for the front battery? do i do a ground there to chassis for each amp?

 

[Dre20xl 10+ year member]

no. ground your amps to the rear bat.

also if you ground your rear bat to the chassis, you should add another ground to the frout bat with the same awg wire as your rear ground.

 

[Pioneer~Saturn 5,000+ posts]

3 runs of kollossus 0-gauge going from rear batts to front batt...no chassis

 

[MmatsDude 10+ year member]

3 runs of kollossus 0-gauge going from rear batts to front batt...no chassis

wtf? lol

 

[01 S 10 10+ year member]

3 runs of kollossus 0-gauge going from rear batts to front batt...no chassis

you dont have any of the batts grounded to the chassis? or just the primary batt?

 

[king ranch 5,000+ posts]

most efficient is have the rear battery grounded to the front battery and wire your amps grounds and pos to the rear battery

 

[theothermike 10+ year member]

do this:

run 1 run of 0 gauge to rear battery for positive and 1 run of 0 gauge for ground.

upgrade your front battery to chassis ground with 0 gauge if you havn't already done so.

then you can run your amps in the back off the rear batteries positive and negative.

Hope this helps.

Mike-