Got The Solo!!!!!!!!!!!!!!!

[gattaluvdatBASS 10+ year member]

the solo X arrived to day curtise of UPS and Mike from IL (Thanks) WELL to the picks . . . . .

The only Solo X iv even seen was a 18 incher and OMFG that thing was F-HUGE but THIS IS THE BIGGEST 12 I HAVE EVER SEEN!

Click to read more...

 

[dumple 5,000+ posts]

sweet get to building and get a vid up

 

[Beerdrnkr 5,000+ posts]

congrats man, what's powering it?

 

[jdawg 5,000+ posts]

meh

 

[gattaluvdatBASS 10+ year member]

dumple,

im trying! its hard only able to get one piece every paycheck.

Beerdrnkr,

thanks man, idk yet i havent decided what to get if i cant find anything under like 250 imna probly just end up getting a Hifoncs.

 

[bdawson72 5,000+ posts]

radical

 

[craigzter 10+ year member]

nice...hook that bish up to a hk4w for shits and giggles. //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[Beerdrnkr 5,000+ posts]

you need atleast 2500wrms on that biatch

 

[gattaluvdatBASS 10+ year member]

iv gotten a couple of good amps in my wanted thread BUT idk yet. i can get a bnib Hifonics thats 2500rms so im guessing about 2200-2300rms at 1ohm maybe BUT they are good amps for the money and with this build being on a little budget its hard.

 

[gattaluvdatBASS 10+ year member]

i would start another thread but it would seem like a waste of time so imna just post it in here.

ok well im wanting to have a box made by FISHER CUSTOMS BUT it doesnt seem like imna have enough patiance for it SO im thinking of just either buying a pre-fab box or making one myself. the only thing is i dont know $h!T about ported boxes. i have made sealed boxes before i know how to calculate the inner cuft BUT idk how big to make the port for what tuning and how much it displaces the cuft of the box.

SO unless someone wants to explain it to me should i just get this box? will it even work?

http://www.sonicelectronix.com/item_7285_12-+Square+Hole%2C+Long+Rear+Slot+Ported+Enclosure+for+Kicker+Solo-Baric+L5+-+L7+Subwoofers+-121KP-.html

 

[skitzafit 10+ year member]

i would start another thread but it would seem like a waste of time so imna just post it in here.
ok well im wanting to have a box made by FISHER CUSTOMS BUT it doesnt seem like imna have enough patiance for it SO im thinking of just either buying a pre-fab box or making one myself. the only thing is i dont know $h!T about ported boxes. i have made sealed boxes before i know how to calculate the inner cuft BUT idk how big to make the port for what tuning and how much it displaces the cuft of the box.

SO unless someone wants to explain it to me should i just get this box? will it even work?

http://www.sonicelectronix.com/item_7285_12-+Square+Hole%2C+Long+Rear+Slot+Ported+Enclosure+for+Kicker+Solo-Baric+L5+-+L7+Subwoofers+-121KP-.html

http://reaudio.com/speaker_box/LPort_Box_Calc.html

 

[gattaluvdatBASS 10+ year member]

http://reaudio.com/speaker_box/LPort_Box_Calc.html

thanks man.

i figured my info in and tuned it a little and i came up with this

http://reaudio.com/speaker_box/LPort_Box_Calc.html

1 question is that i put in the HxWxD/1728 and came up to 4.03 BUT it says on the site that the box volume is 2.121????????????????????

 

[gattaluvdatBASS 10+ year member]

nvm link didnt work well

30width, 14.5height, 16depth

wood thickness. 1"

port: height12.5, width3.5, length(1)11.5, length(2)10

tuning 40.89

did i do something wrong?

 

[skitzafit 10+ year member]

nvm link didnt work well
30width, 14.5height, 16depth

wood thickness. 1"

port: height12.5, width3.5, length(1)11.5, length(2)10

tuning 40.89

did i do something wrong?

You could always have RyanM923 or Ionsql on here design one for you.

I think Ryan charges 10.00 and Ionsql was 25.00.

here is one from Ionsql

 

[99grandprixGT 5,000+ posts]

buy this amp.