good box for pair of street edge 10 inch subs

wiggles

Junior Member
6
0
ohio
recommended box for each sub is 1 cube ported. i was thinking 2 cubes with a single 4 inch port. recommended hz is 37. this will b in a trunk of a honda accord firing inot the caben rear seat folded down. sealed off from the trunk. i like rap music and the wife likes country. so does this sound like a good size and hz? subs will be powered by a older american bass 100.1

 
i had a buddy last nite who does car audio on the side plus used to work at a local shop. said since im gonna fire them inot the car rear seat down i should do 4 cubes with 2 4 inch ports tuned to 35 to 38 hz

 
i should do 4 cubes with 2 4 inch ports tuned to 35 to 38 hz
Absolutely no need to go with that big of a box and that high of a tuning. The peak in the 40-50hz range will be big and you'll have no balls below 35hz. If you're wanting to actually enjoy music instead of just showing off certain songs that work well with your box, then go with something in the 2.25-2.5ft^3 range tuned in the low 30's.

 
Absolutely no need to go with that big of a box and that high of a tuning. The peak in the 40-50hz range will be big and you'll have no balls below 35hz. If you're wanting to actually enjoy music instead of just showing off certain songs that work well with your box, then go with something in the 2.25-2.5ft^3 range tuned in the low 30's.
so 2.5 cubes will work facing into the car? about what size slot port u think will work? and what would be a good hz for rap and country? could u give me dimensions on a slot port i got the box measurements i can use. thanks for all the help. i just wanted some good sound and bass.

 
tune somewhere around 32-33hz..(i prefer 30)
so 2.5 cubes with a slot port tuned to say around 30 -32 hz? fire that forward rear seat down. and will be sealed off from the trunk. what would be some good box dimensions and port dimensions?

 
For box dimensions, u can just use the RE box calculator...but make sure u have at least 15sq in of port per cube
if i get u my trunk dimensions i can spare. would u help me out with dimensions for a box and port?? im new to this and never used a box program. thanks. sorry.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

wiggles

Junior Member
Thread starter
wiggles
Joined
Location
ohio
Start date
Participants
Who Replied
Replies
10
Views
2,131
Last reply date
Last reply from
wiggles
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top