Kusan_31
10+ year member
Senior VIP Member
hey guys,
just wanted to share my experiment with free wood on the ground and a semi broken sub. im a tight sucker when it comes to spending money on my play-around projects, so i used everything recyclabe i could find.
so this is my sub i got free from a friend. however the cone was a little beat up and all the VCs were electrical taped onto the push terminals so i did a really quick solder job.
i sealed all the pieces of wood with some primer sealer and urethane for the heck of it. i didnt have access to a camera at the beginning of the build, but this is when i started plugging the pieces on.
wieghing it down
next i added a baffle in the front to flush mount the driver, also rounded the port exit.
just wanted to share my experiment with free wood on the ground and a semi broken sub. im a tight sucker when it comes to spending money on my play-around projects, so i used everything recyclabe i could find.
so this is my sub i got free from a friend. however the cone was a little beat up and all the VCs were electrical taped onto the push terminals so i did a really quick solder job.
i sealed all the pieces of wood with some primer sealer and urethane for the heck of it. i didnt have access to a camera at the beginning of the build, but this is when i started plugging the pieces on.
wieghing it down
next i added a baffle in the front to flush mount the driver, also rounded the port exit.