Getting 18" 4HP Recone Kit?

[PhatTonyDeMarco 5,000+ posts]

I have an 18" 4HP sub by TC Sounds. It has dual 2 ohm coils, and I just bought an IA 20.1, so I want to lower the load on the amp to get the most out of it.

I was wondering if anyone knew where I might get a recone kit, I emailed TC Sounds but they never gave me a reply, and they dont have a phone number. I believe it uses 4" coils, I am not positive on that though.

Also, would I just be able to attatch any basket to my motor, or does it not work like that?

Click to read more...

 

[Eldorado 5,000+ posts]

http://www.tcsounds.com/Contact.htm

858-622-1212

no number eh //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

Call em up, remember the time zone diff, i think its 4hrs less here.

 

[Remotia 10+ year member]

Keep in mind, when you lower the impedance of your amp, you also lower the Bl product of your driver. You're best bet is to add a second amp. The TC4HP's are monsters. I have seen them take 3000 watts like candy. If you want, we can sell you the top assembly with the quad 1 ohm coil for about $425. I know its not cheap, but that’s our current price for the 18's. Our new TC4HP's are called the TC-5200's and they are $850 each, and that's manufacture direct. They are bit more efficient than the older ones because of a new tall surround to allow for more cone area.

858.622.1212 (9 - 5) PST

if you want to ask me anything just PM me

Thanks,

Kyle

TC Sounds

 

[PhatTonyDeMarco 5,000+ posts]

Wow, $425 for a recone?

I think I'd rather sell the damn sub, which I could only get like $300 max for...

 

[80INCHES 5,000+ posts]

Keep in mind, when you lower the impedance of your amp, you also lower the Bl product of your driver. You're best bet is to add a second amp. The TC4HP's are monsters. I have seen them take 3000 watts like candy. If you want, we can sell you the top assembly with the quad 1 ohm coil for about $425. I know its not cheap, but that’s our current price for the 18's. Our new TC4HP's are called the TC-5200's and they are $850 each, and that's manufacture direct. They are bit more efficient than the older ones because of a new tall surround to allow for more cone area.
858.622.1212 (9 - 5) PST

if you want to ask me anything just PM me

Thanks,

Kyle

TC Sounds

Dont know who u are..but if u really work for tc sounds..we need to talk..i mean asap

80

 

[Raisedin305 5,000+ posts]

Dont know who u are..but if u really work for tc sounds..we need to talk..i mean asap
80

x2...//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

 

[TeamPSI 10+ year member]

LOL... lowering the Bl product of the driver with a lower impedance, but keeping the same amount of wire in the gap wont make any difference in real world output.

I'll sell you an 18" recone kit for $200. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Eldorado 5,000+ posts]

Dont know who u are..but if u really work for tc sounds..we need to talk..i mean asap
80

yes, he does //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[req 5,000+ posts]

LOL... lowering the Bl product of the driver with a lower impedance, but keeping the same amount of wire in the gap wont make any difference in real world output.
I'll sell you an 18" recone kit for $200. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

yea, MT parts.

sigh, sucks because back before all this reaudio retail garbage, recones were like $100\ea //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[Eldorado 5,000+ posts]

At least with TC you can pick which cone you want

 

[InhumanAcura 5,000+ posts]

yea, MT parts.
sigh, sucks because back before all this reaudio retail garbage, recones were like $100\ea //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

the hp4 uses a 4" coil, tard...stfu

 

[Remotia 10+ year member]

Do you want the entire frame assembled or just the parts?

 

[ngsm13 5,000+ posts]

the hp4 uses a 4" coil, tard...stfu

Lawl.

nG

 

[PhatTonyDeMarco 5,000+ posts]

Do you want the entire frame assembled or just the parts?

Just the parts, what would that cost me?...

I'm assuming not much less though.

 

[Eldorado 5,000+ posts]

Kyle, im coming sat, you better be ready

No beer though, not old enough