Get a footing on those old amps!

[o. l. t. 10+ year member]

Cost: $3.50

Like many I have bought several amps without feet. Annoying as this is I decided to find something that is close to the feet in chemical make-up and I'll get the dremel out and do the rest.

Ace Hardware sell the #36 handle adapters in the plumbing section which are made of the perfect hard nylon material for this job.

With a little cutting and fit, you can make yourself some feet for all your amps in ten minutes.

.........and some amp pr0n while we are at it. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Click to read more...

 

[misfit138 5,000+ posts]

nice

 

[Rich B 5,000+ posts]

You dont have to make them.

Go to NAPA and buy license plate spacers,it was a perfect replacement for my Zed made US Acoustics amp.

They even come in the original black color.

 

[jdawg 5,000+ posts]

x2 liscense plate nuts, plus they are lik 50 cents

 

[o. l. t. 10+ year member]

Good suggestion except for they crack under pressure from the screws and vibration. Also, they don't hold up to weather well such as extreme hot or cold, as they tend to become brittle.

I posted this for folks who want a strong beefy set of feet. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[n2audio 5,000+ posts]

rubber grommet?

 

[o. l. t. 10+ year member]

These are specifically for square mounting footed amps, if you have one you'll understand why the round ring has no place.