I am getting out, and I have a LOT of random wiring sitting around to get rid of...
First up, RCAs...
Upper right: Monster Cable 201xln 4-channel cable 16' $30
Lower right: NXG 3-channel RCA 20' $8 (3rd wire is for video, but I used a y-cable to have it carry subwoofer signal. Third wire could alo be removed to have a 20' 2-channel.)
Lower Left: Esoteric Audio (for you old-schoolers!) 2-channel RCA 12' $8
Upper Left: Rockford Fosgate 2-channel RCA (with turn-on lead) 16' $8
Now power wire:
Upper: (Purple) Scosche 8-gauge power wire with in-line fuse holder 16' $5
Lower Left: (Red) Rockford Fosgate 8-gauge power wire with in-line fuse holder 16' $5
Lower Right: (Red) Esoteric Audio 4-gauge power wire 20' $15 (Note: //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif This is the oldst peice of audio "equipment" that I have. I bought it when I first go into audio and it has been in every system I have had, but I am getting out...)
Miscelaneous:
Rockford Fosgate fused distibution block- single 0 gauge in with 4 fused 8 gauge outs. $22
2 LOSc- 1 PAC, 1 Scosche $7 each
2 sets of GM speaker harnesses (for adding aftermarket speakers without cutting factory wiring). From crutchfield. $5 for both sets.
I also have some (4) short 8-gauge sections and about 16 feet of Esoteric 12 gauge speaker wire in 6-7 and 9-10 foot lengths. Last, I have a section of turn-on wire. Buy something else and I can throw in the shorts and/or the speaker and turn-on wire. I also have a couple of the gold-plated ends from in-line 4-gauge fuse holders. Giveaways with other purchase.
Big 3 wiring:
Raptor 0-gauge wire for the Big 3 wiring. I had part of this in my last car, and I had a fuseholder with fuse. I also have a 3' section of unused 0 gauge and a 9' section of 0 gauge. I want $30 for the unused sections and the section with the fuse holder (and fuse) and the "O" ring. SOLD!!!
First up, RCAs...
Upper right: Monster Cable 201xln 4-channel cable 16' $30
Lower right: NXG 3-channel RCA 20' $8 (3rd wire is for video, but I used a y-cable to have it carry subwoofer signal. Third wire could alo be removed to have a 20' 2-channel.)
Lower Left: Esoteric Audio (for you old-schoolers!) 2-channel RCA 12' $8
Upper Left: Rockford Fosgate 2-channel RCA (with turn-on lead) 16' $8
Now power wire:
Upper: (Purple) Scosche 8-gauge power wire with in-line fuse holder 16' $5
Lower Left: (Red) Rockford Fosgate 8-gauge power wire with in-line fuse holder 16' $5
Lower Right: (Red) Esoteric Audio 4-gauge power wire 20' $15 (Note: //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif This is the oldst peice of audio "equipment" that I have. I bought it when I first go into audio and it has been in every system I have had, but I am getting out...)
Miscelaneous:
Rockford Fosgate fused distibution block- single 0 gauge in with 4 fused 8 gauge outs. $22
2 LOSc- 1 PAC, 1 Scosche $7 each
2 sets of GM speaker harnesses (for adding aftermarket speakers without cutting factory wiring). From crutchfield. $5 for both sets.
I also have some (4) short 8-gauge sections and about 16 feet of Esoteric 12 gauge speaker wire in 6-7 and 9-10 foot lengths. Last, I have a section of turn-on wire. Buy something else and I can throw in the shorts and/or the speaker and turn-on wire. I also have a couple of the gold-plated ends from in-line 4-gauge fuse holders. Giveaways with other purchase.
Big 3 wiring:
Raptor 0-gauge wire for the Big 3 wiring. I had part of this in my last car, and I had a fuseholder with fuse. I also have a 3' section of unused 0 gauge and a 9' section of 0 gauge. I want $30 for the unused sections and the section with the fuse holder (and fuse) and the "O" ring. SOLD!!!
