SOLD FS: Two Alphasonik amps new mono block and 4 channel

rcmobile
10+ year member

Member
43
0
alabama
i have for sale two amps, matching set that is brand new

First is the mono block, all new has volt meter and bass knob with it.

both are brand new just took out of the box to take pics as you can see.

the mono block has a cracked plexiglass top, called today and they are sending a new one out, so it will be all like new still. the 4 channel still has the plastic on it!!! never even hooked up

450.00 shipped for 1200da

350.00 shipped for 4150

PMA1200DA

1-CHANNEL CLASS D

MONO BLOCK AMPLIFIER

1300 Watts x 1 @ 4Ω Mono

2000 Watts x 1 @ 2Ω Mono

2400 Watts x 1 @ 1Ω Mono

Dimensions (W x H x L)

9 1/8 x 2 1/2 x 20 7/8”

then i have the matching 4 channel

PMA4150A

4-CHANNEL CLASS A/B

BI-POLAR AMPLIFIER

150 Watts x 4 @ 4Ω Stereo

240 Watts x 4 @ 2Ω Stereo

460 Watts x 2 @ 4Ω Mono

Dimensions (W x H x L)

8 1/4 x 2 5/8 x 22”

DSC00209.jpg


DSC00210.jpg


this is the top that got cracked in shipping

DSC00211.jpg


DSC00203.jpg


DSC00205.jpg


DSC00226.jpg


DSC00216.jpg


DSC00213.jpg


DSC00215.jpg


 
Do they make meds for bi-polar amps //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
never thought of it that way, they might need too...//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Yes, they do. When i ran they sounded very good, and the sub amp seemed to push my subs great, the way it should going by the power rating. I ran a high current amp for the subs, so at 1 ohm, it was a little hungry, but thats it. The 4150 sounded pretty **** good imo.

 
"Do these amps put out ratted power? I have been told yes and no"
same as Audiobling...
Do you have experience with this brand? They may have some affiliation with them, but these are better than anything audiobahn has.

I have a few of their amps, I actually just installed a 1200da and its a bad mofo.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
520
Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
2
597
Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
0
887
You don't need two amps. The speakers come with crossovers to help protect the tweeters.
14
1K
Perhaps you changed something without mentioning it here? Maybe a loose turn on line? I dunno man...but we'll take it. Hopefully it keeps working. 👍
16
2K

About this thread

rcmobile

10+ year member
Member
Thread starter
rcmobile
Joined
Location
alabama
Start date
Participants
Who Replied
Replies
18
Views
1,166
Last reply date
Last reply from
rcmobile
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0
Screenshot 2024-05-31 182324.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top