Item(s) for Sale:
Used Sundown Audio SAX-100.4 v1
Item(s) Description/Condition:
Used to power a set of HAT L6 mids and SEAS Tweets (both will be available shortly). Condition is 9-9.5/10. A few small scratches on the heat sinks and one on the bottom along with the the usual marks on the mounting holes. I tried to get picture of everything.
The amp was ran gently, never clipped, never under powered.
4/3/2 Channel Bridgeable Class-AB Amplifier
MOSFET PWM Power Supply
Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load
Variable Subsonic Filter
Independent 1/2 and 3/4 Channel High Pass Filter Variable
with x 10 Range Selectable Switch
Independent 1/2 and 3/4 Channel Low Pass Filter Variable
with x 10 Range Selectable Switch
HPF/FULL/LPF Selectable Switch
Independent 1/2 and 3/4 Channel Electronic Crossover Slope Selectable
Switch with 12dB and 24dB Octave
Variable Input Level Control
Input Sensitivity : 200mV ~ 6V
Subsonic Filter : 10Hz ~ 500Hz
Signal Input and Line Out RCA Connectors
Multi-Way Protection circuitry (Thermal/Over Current/Speaker Short/Speaker DC protection)
Tested Voltage & THD: 14.4V & Less than 0.05% THD
Operating Voltage : DC10V~16V Power Input
Price:
$250 shipped. No trades!!!
Shipping and Miscellaneous Item Information:
Included
Item Pictures:
Sticker was from another amp. it has been removed.
---------- Post added at 10:17 PM ---------- Previous post was at 10:17 PM ----------
Guts
Guts
Used Sundown Audio SAX-100.4 v1
Item(s) Description/Condition:
Used to power a set of HAT L6 mids and SEAS Tweets (both will be available shortly). Condition is 9-9.5/10. A few small scratches on the heat sinks and one on the bottom along with the the usual marks on the mounting holes. I tried to get picture of everything.
The amp was ran gently, never clipped, never under powered.
4/3/2 Channel Bridgeable Class-AB Amplifier
MOSFET PWM Power Supply
Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load
Variable Subsonic Filter
Independent 1/2 and 3/4 Channel High Pass Filter Variable
with x 10 Range Selectable Switch
Independent 1/2 and 3/4 Channel Low Pass Filter Variable
with x 10 Range Selectable Switch
HPF/FULL/LPF Selectable Switch
Independent 1/2 and 3/4 Channel Electronic Crossover Slope Selectable
Switch with 12dB and 24dB Octave
Variable Input Level Control
Input Sensitivity : 200mV ~ 6V
Subsonic Filter : 10Hz ~ 500Hz
Signal Input and Line Out RCA Connectors
Multi-Way Protection circuitry (Thermal/Over Current/Speaker Short/Speaker DC protection)
Tested Voltage & THD: 14.4V & Less than 0.05% THD
Operating Voltage : DC10V~16V Power Input
Price:
$250 shipped. No trades!!!
Shipping and Miscellaneous Item Information:
Included
Item Pictures:
Sticker was from another amp. it has been removed.
---------- Post added at 10:17 PM ---------- Previous post was at 10:17 PM ----------
Guts
Guts
Last edited by a moderator:
