i am selling a old school rockford fosgate 401s amp. i bought the amp brand new like 2 to 3 years ago. i have not used it in like over 6 months. last time i used it it was working, but i am not sure if it works anymore.. this amp will be sold as is... i am looking to get 50 obo plus shipping..... hit me back if ur interested.... thanks alot..
here are the specs
100 watts RMS x 2 at 4 ohms
200 watts RMS x 2 at 2 ohms
400 watts RMS x 1 at 4 ohms in bridged mode
1200 Watts MAX X 1 at 4 ohms in bridged mode
stereo or bridged mono output
4-ohm stable in bridged mode
Tri-Way capable
requires 8-gauge power and ground leads wiring and hardware not included with amplifier
50-250 Hz high-pass/low-pass (12 dB/octave) crossovers
wired remote included for fingertip control of Punch Bass (0-18 dB boost at 45 Hz)
MOSFET power supply and output devices
MEHSA mounting technology increases the heat transfer from the MOSFET output devices to the heat sink, for higher power output, lower operating temperatures, and greater reliability
TOPAZ noise-killing differential inputs that eliminate 80% of ground loop noise
*****"ana circuitry keeps preamp voltages low and signal paths simple for outstanding audio quality
NOMAD advanced protection circuitry for "intelligent" shutdown protection
speaker- and preamp-level inputs
11-1/8"W x 2-3/8"H x 9-7/8"D
here are the specs
100 watts RMS x 2 at 4 ohms
200 watts RMS x 2 at 2 ohms
400 watts RMS x 1 at 4 ohms in bridged mode
1200 Watts MAX X 1 at 4 ohms in bridged mode
stereo or bridged mono output
4-ohm stable in bridged mode
Tri-Way capable
requires 8-gauge power and ground leads wiring and hardware not included with amplifier
50-250 Hz high-pass/low-pass (12 dB/octave) crossovers
wired remote included for fingertip control of Punch Bass (0-18 dB boost at 45 Hz)
MOSFET power supply and output devices
MEHSA mounting technology increases the heat transfer from the MOSFET output devices to the heat sink, for higher power output, lower operating temperatures, and greater reliability
TOPAZ noise-killing differential inputs that eliminate 80% of ground loop noise
*****"ana circuitry keeps preamp voltages low and signal paths simple for outstanding audio quality
NOMAD advanced protection circuitry for "intelligent" shutdown protection
speaker- and preamp-level inputs
11-1/8"W x 2-3/8"H x 9-7/8"D
