FS: Never used Box for 2 10s

[Boomsday 10+ year member]

Was built but never used due to a website posting the wrong size cutouts (not gonna name names) any how 2.3cuft @32hz charcoal carpet, metallic grey port, has terminal cup on back. Cutout is around 8.25-8.5ish

Looking for $100shipped to the lower 48 on this. I will get actual dims later. Trades welcome

Click to read more...

 

[Boomsday 10+ year member]

Will this work with most 10's , or are the holes to big

Yes it should work with most 10s, before you buy u should check and see how big your 10s are, the holes are 8.5"

 

[audiobaun 5,000+ posts]

What was this going in man??Trunk,or suv,or hatch sir?thanks

 

[audiobaun 5,000+ posts]

5/8" or 3/4"

 

[Boomsday 10+ year member]

What was this going in man??Trunk,or suv,or hatch sir?thanks

Trunk. and 3/4 Birch

 

[audiobaun 5,000+ posts]

Let me take a couple measurements my man.Give me about ten min..Might sound decent in my CRV,with a pair of heavys

 

[Boomsday 10+ year member]

Let me take a couple measurements my man.Give me about ten min..Might sound decent in my CRV,with a pair of heavys

Just an fyi I sold the terminal cup off the back of it so it will need another or a piece of wood to seal the hole

 

[audiobaun 5,000+ posts]

Just an fyi I sold the terminal cup off the back of it so it will need another or a piece of wood to seal the hole

Not a problem sir..Square piece of 3/4 mdf,carpet and some bolts,and shell be alright man..Heighth and depth not a problem..It will just squeeze in there with 1/4" on ea side.Ill find a use for it..use a hacksaw if need be..LOL..Addy please sir!

 

[audiobaun 5,000+ posts]

Im running 4 cuft @32 htz atm..In the CRV with pair of heavy tens.Ill try a smaller cube for a bit

 

[audiobaun 5,000+ posts]

33x16.50x21..That 35 will just fit man

 

[( . )( . ) 10+ year member]

This thing gone?