SOLD FS: MTX 1501d not working
- Thread starter FarrisAudio
- Start date
- Replies 1
- Views 324
-
1Participant count
-
Participant list
-
FarrisAudio
OP
FarrisAudio 10+ year member
Senior VIP Member
- Thread Starter
- #2
i have pictures of the inside, but i cant upload them. If you want the pics of the inside just post your email.
Thanks,
Thanks,
Activity
No one is currently typing a reply...
Similar threads
Thanks buddy!
Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
- Started by Jodhvir Minhas
- Amplifiers
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
- Started by KarRamRod1999
- Subwoofers
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
- Started by It happens
- Amplifiers
In 1990:
The MTX MTA 225 had a MSRP of 549.95
25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8
The MTX MTA 250 had a MSRP of 649.95
50x2 0.02% THD S/N...
- Started by Courtbass
- Amplifiers
Figured it out. For some reason my rca cables would work in everything but the new head unit. I quickly tried a spare set, and that fixed the problem.
- Started by keithman2567
- Wiring, Electrical & Installation
About this thread
New threads
-
-
-
-
-
Fuse Taps at 30amp with 16AWG....- Started by Paul Curtis
- Replies: 11