1. Product:
TC Sounds 10" LMS-4000
2. Specs:
Specifications,
• 3" diameter aluminum wire linear voice coil using LMS Technology (Pat. Pend.)
• Quadruple stacked 3/4" tall, 7.5" wide ferrite magnets
• 300oz motor structure
• xmax of 30mm (one way completely linear Bl )
• Single (10"/8.5") poly-cotton spider with intergraded woven leads (15/12,10)
• Extra clearance under the suspension for dynamic high excursions
• Detachable cast aluminum basket with high gloss power coating
• Single 3Ω aluminum voice coil with four layers
• 800 watts sustained (2500 dynamic)
• High quality thermal flexible epoxies to ensure longevity
• Rigid lightweight brushed aluminum cone
• Vented flared pole piece
• 3" Long copper shorting ring for low inductance
• Rubber half roll surround allows for linear travel
• Dressed in a rubber magnet boot and gasket
• Hand built in our San Diego, CA factory
3. Description/Condition:
Mint. bought off of SPY not to long ago. was going to try to find a brother to use in HT, but none were to be found. so, this one is for sale.
since i love you guys SO much, i'm giving CACO members first dibs.
4. Price:
$300 plus shipping.
you can get an idea of what shipping is. this sub boxed up will weigh 40~45lbs, and be coming from 47404
5. Pictures:
Pic's next to big brother.
TC Sounds 10" LMS-4000
2. Specs:
Specifications,
• 3" diameter aluminum wire linear voice coil using LMS Technology (Pat. Pend.)
• Quadruple stacked 3/4" tall, 7.5" wide ferrite magnets
• 300oz motor structure
• xmax of 30mm (one way completely linear Bl )
• Single (10"/8.5") poly-cotton spider with intergraded woven leads (15/12,10)
• Extra clearance under the suspension for dynamic high excursions
• Detachable cast aluminum basket with high gloss power coating
• Single 3Ω aluminum voice coil with four layers
• 800 watts sustained (2500 dynamic)
• High quality thermal flexible epoxies to ensure longevity
• Rigid lightweight brushed aluminum cone
• Vented flared pole piece
• 3" Long copper shorting ring for low inductance
• Rubber half roll surround allows for linear travel
• Dressed in a rubber magnet boot and gasket
• Hand built in our San Diego, CA factory
3. Description/Condition:
Mint. bought off of SPY not to long ago. was going to try to find a brother to use in HT, but none were to be found. so, this one is for sale.
since i love you guys SO much, i'm giving CACO members first dibs.
4. Price:
$300 plus shipping.
you can get an idea of what shipping is. this sub boxed up will weigh 40~45lbs, and be coming from 47404
5. Pictures:
Pic's next to big brother.
